1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

S**T people say on TW

Discussion in 'Off-Topic Discussion' started by ecgreen, Apr 10, 2017.

  1. Jul 10, 2017 at 10:06 AM
    #621
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Ha. WTH does bump mean? I see it a lot here. I'll probably make this list, but I make it to many lists.
     
    ChadsPride likes this.
  2. Jul 10, 2017 at 10:06 AM
    #622
    BYJOSHCOOK

    BYJOSHCOOK Mr. Mojo Risin

    Joined:
    Jun 9, 2013
    Member:
    #105887
    Messages:
    27,924
    Gender:
    Male
    First Name:
    Josh
    Woodstock and Alpharetta Ga
    Vehicle:
    2000 SR5 4WD Lunar Mist
    Check Out My Builds
    It "bumps" the thread back to the top so it gets more views
     
    ChadsPride likes this.
  3. Jul 10, 2017 at 10:10 AM
    #623
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Shoulda bought a Yugo.
     
    jeff b[QUOTED] and ChadsPride like this.
  4. Jul 10, 2017 at 10:12 AM
    #624
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    It's called selfie because narsisizm is too hard to spell?
     
  5. Jul 10, 2017 at 10:14 AM
    #625
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Eh, if it'll start.
     
  6. Jul 10, 2017 at 10:14 AM
    #626
    ChadsPride

    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
  7. Jul 10, 2017 at 10:18 AM
    #627
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Nothing, and who wants that?
     
    ChadsPride likes this.
  8. Jul 10, 2017 at 10:19 AM
    #628
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Bump
     
  9. Jul 10, 2017 at 10:21 AM
    #629
    ChadsPride

    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    Unsubd
     
    DesertTaco4x4 likes this.
  10. Jul 10, 2017 at 10:44 AM
    #630
    ChadsPride

    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    Do it right the first time​
     
    BYJOSHCOOK likes this.
  11. Jul 10, 2017 at 10:46 AM
    #631
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
  12. Jul 10, 2017 at 10:58 AM
    #632
    BYJOSHCOOK

    BYJOSHCOOK Mr. Mojo Risin

    Joined:
    Jun 9, 2013
    Member:
    #105887
    Messages:
    27,924
    Gender:
    Male
    First Name:
    Josh
    Woodstock and Alpharetta Ga
    Vehicle:
    2000 SR5 4WD Lunar Mist
    Check Out My Builds
    It's a shit poster!
     
  13. Jul 10, 2017 at 11:03 AM
    #633
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Am I at least in the right thread?
     
    ChadsPride likes this.
  14. Jul 10, 2017 at 11:05 AM
    #634
    BYJOSHCOOK

    BYJOSHCOOK Mr. Mojo Risin

    Joined:
    Jun 9, 2013
    Member:
    #105887
    Messages:
    27,924
    Gender:
    Male
    First Name:
    Josh
    Woodstock and Alpharetta Ga
    Vehicle:
    2000 SR5 4WD Lunar Mist
    Check Out My Builds
  15. Jul 10, 2017 at 11:07 AM
    #635
    ChadsPride

    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
  16. Jul 10, 2017 at 11:10 AM
    #636
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    jeff b and ChadsPride like this.
  17. Jul 10, 2017 at 11:11 AM
    #637
    ChadsPride

    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    subd​
     
    DesertTaco4x4 likes this.
  18. Jul 10, 2017 at 11:15 AM
    #638
    Shelf Life

    Shelf Life Well-Known Member

    Joined:
    Oct 3, 2014
    Member:
    #139592
    Messages:
    6,689
    Gender:
    Male
    First Name:
    Rob
    Central Oregon
    Vehicle:
    '06 ACC CAB 4x4 TRD OFF ROAD
    I didn't come here for a fight.
     
    ChadsPride likes this.
  19. Jul 10, 2017 at 11:18 AM
    #639
    99TacoDriver

    99TacoDriver Well-Known Member

    Joined:
    Jul 8, 2011
    Member:
    #59531
    Messages:
    6,877
    Gender:
    Male
    South Louisiana
    OME 885x/5100s/LR UCA/3 leaf AAL/275/70/17 Terra Trac X-Venture
    DCSBFTMFW
     
    jeff b, Juforrest and ChadsPride like this.
  20. Jul 10, 2017 at 11:19 AM
    #640
    SLO TRD

    SLO TRD Living the SLO life.

    Joined:
    Feb 28, 2016
    Member:
    #179640
    Messages:
    372
    Gender:
    Male
    First Name:
    Gene
    San Luis Obispo, Ca.
    Vehicle:
    2016 Magnetic Grey TRD Sport DCLB
    Snugtop, 5100's, weather tech mats floors, truck bed, Tinted front windows.
    Say what?
     
    ChadsPride likes this.

Products Discussed in

To Top