Icon 700lb springs to 600lb springs???

So i have the icon stage 3 with 14in 700lb springs and it stiff as hell!!!! I am thinking to switch to kings 14in 600lb springs??? Any thoughts on this?

 

I had both and didn't really notice. But I have steel skids and a winch/bumper.

The 600# required more preload. 700# less preload but rode about the same. So much that I just wished I kept the 600# and didn't bother with th swap.

 

Are you going to be adding any more front end mods , Bumpers , Skids, Winch? The extra weight will soften the 700's a little not much but you get the height from sagging! I added those mods and my front height lost about 3/4 inch and i am maxed out on preload. So i going to bump up to 700's. If you want to sell your 700's i may get them from you if your in SoCal area let me know or we could even swap for my Icon 600's. But i wouldnt change them if your looking to add those front Mods!

 

Yeah I plan on putting on a bumper and winch, the 14inch springs require no preload at all and I still have like 1 3/4 lift in front. They are just so damn stiff I guess I just have to deal with it until I get the bumper and winch, thanks tho.

 

Yeah i would wait, you will want them back on if you add those mods! Good luck.

 

Were yours the 600s 14inch or 13 inch bc the standard ones that come with icon are the 13inch 650 and I think that's why people have to crank them down so much is bc they are 13 inch.

 

Yes in fact they are the 13 650's my bad!