285/75-17 will it fit with my mods

3" bilstein 5100 lift, with spacer in the front
bilstein 5100, ome rear springs rear

0 offset XD rims.

I don't mind cutting my bushwacker fender flares, but have not done a cab mount chop. The guy at Les Schwab says it will be close, but he has never put on anything bigger than 285 70 17. He said, if there is a rim that will fit the bigger tires on that truck you have it.

 

You most likely will have to do a cmc but I would put them on and find out. A 285/75/17 is 34.4" people are doing a cmc with 33's

 

really don't want to chop the mount. I dont have the skillz, don't know anyone local who does....

 

34's make me horny!

 

Jeffb, how many hours labor do you think this would be? What type of shop should i look for?

 

Should take more than 2 hours. Look for a local fab/weld shop.

 

you shouldnt pay over $100 to have it done.

 

Maybe @Bennett707 could have a recommendation.

 

My biggest concern with the CMC is getting enough paint behind it. Try pushing your caster to 3 degree or more if possible. I ran 285s without rubbing the cab mount that way.

 

Yeah, I have done it. But still no guarantee you covered all the bare metal and paint that had been burnt off during welding. You really think the paint will still be there after welding? Why do cmc if it's not needed? I'm just saying to try to push the caster out before cutting up the frame. I don't need to lighten up. Maybe check my build

 

I hear @bullaculla doesnt even wheel

 

This is true. It's been over a year

 

I got a good chuckle at what Jeff said about him actually wheeling, implying you don't.

 

Yep, I'm not as hardcore bro!
Too skurred to cut up my truck

 

Took mine off a few days ago when installing my lift. It's kinda fun leaning around corners.

 

Wow! No swaybar? Badass!

 

I don't have a swaybar either

 

Unsubbed. Good luck fitting your tires OP.

 

285/70 or 75?