Wheel spacers

I'm thinking about putting 1 1/4 wheel spacers just in front to give it a slightly wider stance, doe anyone know of someone who's done this and if so how did it come out.

 

You very well may be the first person to do this. Let us know how it turns out.

 

Just busting your balls OP, welcome to TW! A lot of people have put spacers on. Get a good brand like Bora or Spidertrax, and make sure you properly torque them, rechecking them every so often. Do that and you're fine.

 

I know some people who do just the front for the wider stance. At least one person off the top of my head.

 

Did it look good. Or like shit.

 

So curious run

 

This is @Alfuh's truck. IIRC he's got a 2" spacer in the front but not in the rear. At the very least his front is wider than his rear due to his spindles.

https://www.tacomaworld.com/threads/the-alpha-build.291797/

 

Oh yeah, and I think @Mobtown Offroad did the same on their 4runner.

 

Thanx for the input. Much appreciated.

 

Yup. 1.25" Spidertrax wheel spacers.

 

I would personally run all 4, but don't see the harm in just 2 up front. Just go with quality hub centric ones like spidertrax. I had those on my 1st and 2nd gen for the longest time with zero issues. Make sure you torque them properly, also torque the lug nuts to the spacers properly. Check after your first 100 miles then your good until your next tire change/rotation. Enjoy.

 

Nice. Thanks bro.

 

I have ran 1.25" front hub centric spacers for over 50k miles on my 4runner. No issues. Looks fine.

 

Looks clean. Thanks for the pic

 

I did two up front only. Never had an issue.

 

Do you like the look..

 

Cant speak to the 1 1/4'' but I'm running 1'' spacers on mine. It has a much better stance. It's caused no issues for me and i've been running them for about 8 months now.

 

Been looking into 1.25 spacers as well but not sure how they will look on a stock set up. Was thinking about waiting until I install my lift and tires. Anyone here running them on stock tires and lift?

 

Pville, thanx for the pic that's what I've been looking for

 

I have 1.25" spidetrax on my Tacoma without an issue. I run BORA 1.75" on my 4runner without issues. Go with either one of those brands and proper install, you will be good to go.