San Diego BS Thread.

Glad you got it worked out man sorry that happened.

 

Let me go check if those generic spline keys that come with tuner style lugs are the same as the pro comp one. If it is, I have a spare you can have. Going to run outside real quick and check lol

 

It fits my pro comp lugs. You're welcome to have it if you haven't found one yet. Lmk!

 

Thanks, I'll look into them as well.

 

dope man might steal it from you lol

 

Anyone trying to get rid of/sell a decent set of 31x10.50 R15s? Thanks.

 

Anyone know if I have to take me dakars off to add the aal? or can I just open it up while on truck? will I need a longer bolt

 

also keep your eyes peeled for a solid long bed shell! Me likey

 

I think you can do it on the truck. Just drop the axle and use clamps.

I've done a aal like that.

I had so much trouble getting that front leaf spring bolt in and out

 

yeah I didn't wanna mess with everything

will the center pin be long enough?

 

You'll more than likely need a new pin

 

The issue with adding the leaf while its on the truck is that the leafs will open down quite a bit, so you will need to set your truck fairlly tall with jacks on the frame to allow the down travel to expand without your axle still being in the way. Dakars being for more travel, it will flex more than a stock pack.

you will need a new center pin.

 

Mine was pretty long I actually had to cut it down...how long is yours now?

 

Measure the amount of thread and how thick the new leaf is, yes you can do it with leafs on the truck, just make sure and clamp them so they dont open up, also make sure you have about 1/4" of thread to play with more than the total of your current pack and added springs.

Edit: Its obvious but forgot to say, also add in the height of the nut plus that 1/4"

 

anyone with some oem shackle hangers in decent shape? or someone wanting to trade for a shackle flip plus cash?

 

Saturday trim job before and after!

 

Doesnt BAMF or somebody have some beefy ass adjustable ones (3 optional pivot point settings)? I've done a few sets and they are 20x stronger than the stamped POS ones that come on the truck when you really start pushing its limits.

 

@ARCHIVE kit looks real good

 

diggin it Jason!

 

Sounds good Evan, I'll see you tomorrow morning, I got your CMC plates cut out this afternoon so were ready to rock!