What Have You Done To Your 3rd Gen Today?

I had my eye on one of these but am getting a smokin deal on the new arb all weather unit. Can't wait

 

Wifi?

 

Thanks! I really like them. Not bad price either. Discount tire.

 

Guys, i know it's very confusing, but these are Japanese trucks.

 

Wifi So you can watch porn and drink beer in the middle of no where....

No Wifi so you can change temp / turn unit off on / have deviation alarms at 3 or 5 degrees off set point.... and something else I'm forgetting. If the fridge is buried in the bed or covered it become more useful.

 

Nice rig!

 

Made mounts for 2 & 10m ham, and 11m (cb) radios, mics. Also a mount for the 10/11m antenna. Used a Relentless ditch light bracket for the 2m antenna. Took a while and a lot of going back and forth get everything where I wanted it. Glove box opens without hitting the radios (by literally one millimeter) and I can still shift into fifth and sixth without banging my hand against them. Used cat5 cables to route extensions around the back of the console (will go under it later on) and then under the driver seat, where the cat5 couples to the mic cables. This way the mic cables aren't cluttering up the shifter etc.

Sorry about the lousy pics!

 

Still working on my BHLM. Major PITA getting that sealant out.

Also did a test video using my new Smooth Q stabilizer while walking around the truck.

 

Are you guys talking about this? Glad mine came uninstalled.

 

Damn that's gnarly. Make sure you get every little shaving out ...otherwise the lens won't seat correctly.

 

Thanks for the tip. I have to say it'll be the last time I do headlights. Lol

 

Nice! Must be a thing, My wife has a CX-5 in Blue!

 

Nice! I need one of these. Can you send a link??

 

yeah not big on having a logo like that front and center

 

http://www.lockerdown.com/2016_Toyota_Tacoma_Console_Safe_p/ld2047.htm

 

Thanks!

 

I put two smaller quick fists for my axe and one large quick fist for my fire extinguisher on my front bed rail. If you don't have a front bed rail, go to home depot and buy a piece of uni-strut and cut it to size (wish I had known this before I bought the Toyota-branded one). I then bought 3 t nuts that would fit the uni-strut, with associated bolts and washers to connect my quick fists. Super easy and cheap solution.

 

Did a little update to the start up screen on the Pioneer 8200NEX!

 

Nice! I've finally decided I want to put these on my truck - who did you get yours through?

 

Wow didn't know it was that big, thought it was just a stamp like on the window vent visors.

Nevermind what I had suggested