What Have You Done To Your 2nd Gen Tacoma Today?

i had a clunk when turning and hitting a bump or sometimes just hitting a bump.
removed sway bar and have been clunk free ever since. you could try to grab the swaybar and jiggle it to see if its lose

 

doooo eettttttt

 

​

 

Awesome thanks. I'll take a look at that too

 

Could be your link ends too.

 

oh hell yes i want one

 

Newbie here... Not today but recent. New paint, Spyder headlights, taillights, foglamps, and tonneau. Have to do some adjustment with the cover. It doesn't want to retract completely all the time. Anybody got any experience with Rollbak G2 and have some suggestions? Have a tailgate seal to install and have been working on plugging some holes in the bed pockets to cut down on the dust. Lots of dirt road drivin'.

 

I forgot I got these when I bought my speakers. Free if anyone wants them.

 

This just happened too...

 

All of this. There are a lot of moving parts in the front end which can produce very similar noises when they start to fail. It's difficult to diagnose over the internet and probably cheaper to have a mechanic or somebody with experience troubleshoot than it is to start throwing new parts at the problem.

 

Changed u joints on my rear driveshaft. One was so bad it lost half of its needle bearings so I'm glad it's done. I put spicer/Dana - factory parts back in. Used a vice and sockets to change out the u joints. Way better than hammering like I had in the past. Test drive-No vibes 0-80 mph.

 

Finished the last step of the detail since starting late saturday. strip wash, decontamination, light correction, ceramic coating and final sealants. Most of the time was letting the coating cure.

And the best part is opening the garage to find out its raining in Socal...

 

Wrong. THIS is old school.

 

You have a good point. At 39,000 miles on a 2015, I think I'm just outside the warranty that would cover these parts

 

This was my first Toyota except mine came with a black roll bar in the bed. It got wrecked slightly and ended up repainting it red/black I wish I could find a pic of it.

 

Looks badass!! Thanks for using me for some of the install!!

 

put it & my trailer to work again, tore down the old privacy fence beside my house and got it all loaded & ready to goto the dump tomorrow.

 

Chilled with bros

 

Tiny mods can be just as fun as big mods! Thanks to @tylerb2011 for this vid's outro image!

https://www.youtube.com/watch?v=aoBhnUPWmd4

 

No!
This is old school! V



^ That's Pancho Villa around 1909!

https://www.youtube.com/watch?v=m1rlyl8VZFM