---BRO-COMA--- 3rd Gen. Build - 30% Bro, 60% Build and 25% BS

Brotastic.

 

Hopefully you didn't spill it, that would probably strip the paint off.

 

So first off I have shin splints in my forearms from all the chores my aunt made me do this weekend. I don't know what she was thinking handing me a chain saw. She told me two things, don't hit the ground and don't cut my leg off. I now owe her a new chain , but I still have my arms

I got a little done with the wiring. I decided to use Weatherpack connectors instead of the Terminal Blocks. Weatherpacks are freaking sweet, and quick. Each pin is rated to 20amps, anything over 20amps I'll wire separate. ARB compressor 6.5amps, 30" light bar 12amps, so I should be good.





Light Bar custom harness


I found this thing. I think it will fit perfect over the Taco's Fuse Cover. It's made by the same company that made my Bussmann RTM thing. 6 Relays (12ga), 6 Constant hots(16ga), and is actually rated to the full 270amps!

Bro, it's real Carbon Fiber!

 

I need one of those! My wimpy one only does 100a or so. When I run my compressor I have to make sure everything is off. Haha

 

Damn that's got to be one hell of a compressor.

The little ARB is only 6.5 amps, and my Viair 450C is 23amps.

I noticed that a lot of people are running 4ga wire to their boxes, I'm running high quality 8ga. From the charts I've been reading that's good to 200amps for a length to 2'.

That being said, I'm swapping everything out to 0ga.

Side note, I was having issues with the solenoid not engaging for the locker. It was getting voltage but not moving. Turns out it was just stuck. It works perfect now. I did a leak down check and I gave up after 55min. I believe ARB says anything over 15min is a good seal

Not sure if I ever posted a pic of how I ran the ARB line to the axle.

 

Oh this looks fun.
I'm in the process of adding a 30" led, 50" led, and a pair of bed lights to my truck and want to use something like this as opposed to running a ton of 'relay kits' and making a rats nest of my truck!
Where'd you get it from?

 

Okay. I lied a little. My arb pulls 50a. But my fridge is up to 10a. Then my lights at stuff. I think my light bar thing pulls a lot too.

 

You still carry the stock spare around?

 

Multiple reasons. First, just like a Trophy Truck, I need rear weight to make the Rough Country Shocks dampen properly. Second, A full size spare is super expensive bro. Third, I can't figure out how to remove it

 

I was thinking your truck is too tall for the spare to drop to the ground.
Or you left it there so you could potentially help another bro out, should you find one stranded with 2 flats.

 

​

 

Oh snap...

Shits about to go down

 

No matter how hard I try...Im like three steps behind from your bro tactics.

You wear the name well.

 

That being said, your avatar is pretty much my motivation in life

I hope to have an epic AF update in a few hours...

 

Panty droppin' taillights?

 

Bro you're like the fawking Nostradamus of TW. You spying on me

 

Nope, I've had a box similar to that one in my possession before.
I broke a taillight failing to properly load a couch in my truck.

 

Seeing that going LT is incredible expensive, and my cell phone scam only netted me $240 and one pissed off father, I have decided to switch to cosmetic mods.

It took all day, but I got the TRD Pro Tail Lights in.

Thanks @Titus_Will_Toyota for the deal, and amazingly quick shipping. Placed the order Monday, he didn't have them in stock, yet the showed up earlier today







Only thing that could make this pic better would be some 37's

 

Chop that exhaust! ​

 

Fuck man you already got some Ray10s! Are those gunmetal or matte gray???