Group Buy: Locked Off-Road Bumpstops- CLOSED

Im sure there is. Like I said the quality of these bumps is amazing and it's a matter of time before his name gets bigger and more people are running these bumps.

 

Someone educate me on the purpose of these. Planning on doing a King or Fox suspension lift soon. In what way would this benefit me?

 

Bumpstops basically are a cushion to keep your suspensions from over traveling which can damage it

 

How much of an upgrade is this product or similar (king, fox, timbre) over stock?

 

These are of the same quality of king and fox, for a way better price. I feel most people are weary about hopping in the group buy because it is a fairly new brand just getting started. I have run these on my old truck. Have another set ready to go on my long travel Tacoma, just haven't installed yet

 

Hey guys! My name is Maxx.
Just thought i should step in and try to clear up some of the skepticism!

A few months ago i picked up a set of these 2 inch pin style bump stops from Locked off Road. I too was a bit skeptical because at the time, i only wanted King Suspension on my rig. I had a set of King Bump Stops sitting in my online shopping cart but was reluctant to buy due to the high price tag. Thats when i found Locked Off Road on Instagram of all places. After looking through pics of their work and seeing some of the bad ass builds that were already using their gear i thought i would drop them a message and ask some questions about fitment, quality, size, ect. The Owner Riley got right back to me and walked me through all of my questions. Based on his awesome customer service and their 100% guarantee on quality, I decided to give it shot and ordered a pair of 2 inch bump stops.

There was little to no wait time on my order and i had the bumps within a week or so. They came with heavy duty sleeves ready to be welded and the bump stops and the hardware seemed to be that of the same quality as my all my King Products.

Instal took very litlle time at all. I have a fellow Firefighter buddy who does some basic welding on side projects and asked for his help in exchange for some beer and we struck a deal. we started by chopping off the stock bump stop. i chose to mount it in this location because it lined up with my Baja Kits Lower Control arm that has a reinforced plate designed to be used in conjunction with bump stops as does a stock lower control arm. After making room for the bumps we welded the sleeves directly to the frame. Afterwards we added small steel triangles for added support. This may not look the cleanest but it is functional, sturdy and works wonders.

Now for performance. Couldnt be happier. If i could give the Five Stars i would. My wife and i took the truck to the Moses Lake Sand Dunes in Washington state before and after installing the bump stops and my wife even mentioned how much softer the suspension felt. She was actually able to relax and enjoy the ride! We tested the truck on the exact same whoop section. Before installing the bump stops the truck would start off ok but after hitting a few large whoops the truck would begin to buck up and down eventually bottoming out to the point where i would have to stop. now with the bump stops , hitting the same section the front end floats right over, there is no harsh bottoming out and the ride is enjoyable. Now im just waiting to get some for the rear end.

In conclusion. I'm totally satisfied and will be buying a set for the rear. They have held up to thousands of miles of abuse and show no wear at all and continue to work flawlessly.

I seriously hope im able to put you guys at ease because If you go with King, Icon, or Fox your literally just paying more for the name and the sticker and probably wont get the customer service or guarantee along with it.

Ive attached some pictures of my truck and the bump stops. As well as the truck and bump stops working together in perfect harmony.

 

Unreal review dude. Couldn't have said it better myself. Locked makes a badass product and anyone would be lucky to run them on their rig!

 

Bump... I could potentially do local pickup. Give me couple days to decide if I can swing these.

 

Sounds good! Let me know

 

In theory, these should be a bolt-on option to mount these in the rear, right?

http://www.chaosfab.com/2016-2017-Tacoma-Bolt-on-Rear-Bump-Stop-Kit-48623F

http://www.chaosfab.com/2016-2017-Tacoma-Bolt-on-Rear-Bump-Stop-Kit-48623K

Anyone know if the King or Fox version would work? I'm guessing the Fox ones...

 

Any fabricator can easily make you a bolt on mount for these.

 

Yeah, I understand that... but my question was will one of these TC pre-fabbed setups work?

 

Sorry. Didn't full understand your question. Yes they will work, however we are going to try and get some made for cheaper than total chaos and hopefully have them as a permanent part of the production line.

 

That would be awesome! Yeah I mean there are dozens of fab shops where I live, I just think it'll end up being around the $450 that TC charges for a one-off custom build at a small fab shop.

 

I hear ya man. You definitely can't go wrong with these bumps. Small company right now but once more people see the quality of what locked has to offer, at a fraction of the price that king and fox are, its an easy decision. Which is why we started the group buy! hoping to get more guys running these bumps on TW so everyone can see the quality !

 

Badass tundra running an LSK kit with 2" Locked bumpstops

 

bump. lots of people interested but still a little skeptical, which is understandable. However, just like @MaxxTRD said, the quality of these is comparable to king and fox but at a lower price. I know people won't be disappointed!

 

just waiting to order my shocks first, then will be getting on the list for these.

 

I think I'm going to have to wait awhile before I spend more money. I think when I get them I will also get the 4". Im glad to have heard about this company though!

 

Glad to hear it! Can add you now if you want?