Norcal Spotted and BS Thread

OHH NICE

 

I got no sway bar. Threw it in the dumpster.

 

i dont either. aint need that.

 

It's always sumthin'. But which ones? Stock, 2", 3.5"? So much I don't know that I don't know.


Damn

 

Ive got a 15 with 20k on it. Not my daily so 80% of those miles are highway / trail miles from camping / wheeling / hunting trips. Not a fan of driving around with my foot in it all the time. Ive got a plan and going 35's before I re gear isn't part of it.

 

Don has 700lb coils.

 

sweet..... BRING THE LOAD!!!!

 

damn, i need a daily. And a place to store all my other shit. Im wasting away my runners prime time with it being my daily.

 

the link i sent is all you need. its for stock spindles so they're just showing what it applies to. Since its stock spindles it doesnt matter

also, if you need superbump spacers i still have plenty of 1/2" pucks i can send out.

 

Can you fish it back out? I've been thinking of doing the double sway bar mod.

You know what they say twice the sway, twice the lay(dees).

 

Wait a minute. If it's for stock spindles then it doesn't matter. Huh? So, I would need the stock ones since I haven't changed spindles?

Why would I need spacers? I just put on new bump stops.

 

Sorry, WM picked up at 0600 this morning.

 

I bumps front and rear

 

you have stock spindles, thats what the link was for. The lower portion online where it states stock lenght/+2/+3.5 is just showing its for all. If you dont want to bend a spindle i'd recommend it.

Did you check your clearances? i had to add a 1/2" spacer for mine with the LT before my tires would destroy everything.

 

Not necessarily. If you end up having to excessively preload the coils to get to desired ride height, you can run into spring bind. That would be bad. Be prepared to swap coils once you get your bumper and winch on. Don went with 700 lb coils in preparation for his bumper upgrade.

 

Shoot would have been sweet with my 4" body lift. Perfect gap between the frame and body to showcase it.

I'll keep looking.

 

I bought, painted, and installed my front bumper one weekend when wife was out of town. Two weeks later she got in the truck and asked what that thing was sticking out above the hood? I said that's been there for over six months. She said she guessed that she just never noticed it. HOW THE FUCK DO YOU NOT NOTICE THIS FOR 2 WEEKS?
I don't ever want to hear shit when she comes back from the hair dresser with her hair color 1.3 shades lighter and I don't instantly say how amazing it looks.

 

I don't wheel as much as some of these other guys, but an aluminum bumper probably could have handled the low speed hits my front bumper has taken.

The HC rear bumper would probably be destroyed if it was aluminum. Same with the skids. I'd go steel with those.

"Just in case" you go offroad?

The sway bar compatible version of the spindle gusset is stronger.

Thought it was due to lack of participation...

No one says that. Oh, you mean the hips? No one says that.

 

Exactly!