NJ B.S. Thread

Where in Colorado are you moving? I guarantee I'll be planning a trip out there in 2018 to meet up with @Littles

 

Holes and bends are nowhere near close. I'm not even sure a welder would be ideal. IIRC there was a bend right where they join.

 

Good luck, and have fun in CO.

 

Maybe an upcoming RC trip?

 

Yeah, there's AOAA at the end of Sept.

I'm not sure what's between now and then. If I don't go there is always TW Express with someone who is.

 

I have free wheels & rubber. 4 of the OE 12-15 16" wheel with some well worn at2s on them. And 1 steel spare, w/ a pretty decent at2 on it. They all have the factory tpms sensors in them. Pickup in philly only.

 

I'll see you in October Ryan good luck homie!

 

I may take those, a couple guys in DC are looking for steelies too.

 

Are these the OE TRD OR wheels? I only need 2, maybe three. I tore up/banged up/dented the edges of one of my my current OR wheels at Takeover. I think @fatfurious2 knows someone that needs another.

Passenger front


Driver front

 

@Lots2Learn58 needs one. Im coming up in a couple weeks, and can pick it up

 

Higher? What are you at now? Can't go higher than 3 without a DB lift. And we don't recommend that junk.

 

Those look functionally fine just not good looking.

 

I know a few people who have wheeled pretty well with a Drop Bracket lift.
Granted, it's not ideal, but I wouldn't call them junk.

 

Exactly. And since you're jacking up the entire front suspension you can throw 37's on without doing all of the tubbing.

Like I said, it's not ideal - just another way to do things...

 

Would help keep my frame off the rocks

 

Got the knock off ARB intensity. Bright is an understatement.

 

Only 885s and 5100s set at 0 with a single AAL. I could go up an inch or two but I'm cheap and don't want to buy UCAs and tires right now. Plus, I obviously drive a shit ton for work so try to keep it somewhat street worthy.

 

What lights are those? Need something for the Wife's Heep.

 

gotta take all 5, don't wanna go through the hastle of separating em. what you do with them after that is up to you

 

only 1 is the steelie. the 4 are the OE aluminum wheels. standby for picture.