Glove box door removal?

Yes, yes I searched, nothing came up.

Anyone know a simple way to remove the glove box door?

I want to put an inlay sticker in the door but would be much easier if I could take the door off first.

Thanks!

 

There are no sides on the door of the 3rd gen like there is on a second Gen.

Maybe I don't get it.

 

Not the same as 2nd gen..... But I've not looked at it.. Can't be all that hard to figure out if you look at it...!!

 

Lemme go looksee

 

Ya, just looked. I know the style you're thinking of, RAV4 similar. This is just the door, not door + tray.

OP...I'm thinking the panel below has to be dropped for better view to the hinges...let us know

 

Yeah that's probably the case.

 

Here is a video of a 2013 Tacoma glovebox removal that may be helpful. I have been doing some research because I want to change my cabin air filter soon.

https://m.youtube.com/watch?v=dmMVNwnBX_M

 

Nah it's different. Thanks though!!

 

Just tried removing mine today. I'm missing something on the lower left. I can't figure out if it's a screw or a clip and don't want to break it.

Any luck on this yourself?

 

Okay then.

 

Nope I left it.

 

Has anyone figured out how to do this? I tried and can seem to get it off.

 

Perhaps the following thread might help?

https://www.tacomaworld.com/threads/need-help-removing-gl-box-air-bag-panel-please.506727/

Also, the service manual is available, that might contain the info you seek:

https://drive.google.com/file/d/1wCb1pU29yOgp9qlPwrKgqROwPGqj-VBu/view

 

This data above is good.
Also see https://www.tacomaworld.com/threads/lock-stock-and-2wheel-low-3rd-gen-diy-mod.536677/#post-17273014
for a pdf I wrote for removing the glove box to do 2 wheel low mod.

 

Thanks Guys. I ended up not removing it, but useful when i start my next project in the next few weeks.