What have you done to your Tacoma today? 1st Gen Edition

Grill was around $50, mesh insert was $200, and lettering was $45. So cost me about $300. I built it myself.

 

every ls swapped taco ive seen has been 2wd or sasd. id like to know if its even possible for the oil pan to clear the front ifs diff. i have a 6.0/4l80e from a rusted out chev 2500 that id like to put in the taco one day when it isnt my only daily driver.

 

It actually cleared better than we thought it would. I got a canton racing front sump oil pan so it clears the diff by a mile. It cleared fine with no cutting but we went ahead and notched the front crossmember just a tad to give it even more room.

 

Posting again because I didn't get a definite answer. Has anyone replaced side mirror glass? I have power mirrors and the motor and everything still works fine but the glass is shattered. Can I just glue on a new glass piece or do I have to get a whole new assembly.
04' power mirror driver side

 

this is happening right now.

 

Holy positive camber batman

 

I was thinking the same thing.

 

My driveway is like a ^ and pitches down to the right pizza cutters don't help the pic either

 

Quick question. Key goes into door but won't turn to unlock it. Haven't got a chance to look at it yet. Easy fix?

 

You can get the glass from rock auto for like $5.

 

I saw the glass but wanted to know if anyone had done it, and what they used to adhere the new glass.

 

For $5 I'd just stick it on there with some good glue/epoxy

 

I officially became mall rated today

 

You said you sold it for a benz

 

You can get the glass only and stick it on with a good 2-part epoxy. Don't press too hard and break the new one when installing it! It might be easier if you remove the whole assembly and let it sit glass-down to let the epoxy harden, that way it won't run down and drip out the bottom.

 

For anyone who's replaced their clutch, did you need a guide tool to keep the clutch centered on the pilot bearing? I've seen threads talking about doing it without mentioning one and a video that uses one. Confused.

 

Yes one should be used otherwise it is a super tough job to get aligned, basically a huge waste of time without the tool.

 

This guy yea?
http://www.lowrangeoffroad.com/toyo...ne-1-125-dia-47-11-938-mm-pilot-diameter.html

 

Yeah but just about every clutch kit that isn't complete garbage comes with one. Even crappy Duralast clutch kits have one included.

 

Thanks - first timer

Anyone recommend lce kits? I'm going to be ordering headers and figured it'd save money on shipping if I bought one from them...