Clazzio leather seat covers!

I thought id be done in 2 hours, took a solid 3. As many have said, thake the front seats out to make things a bit less frustrating.

 

Headrests are the most difficult part of the entire installation

 

I like this. Somehow I stumbled on here. This is what I've been looking for. Black on black with light gray stitching. Embroidered front headrest. Instead of the blue TRD off-road I would like red. Everything else the same. This is awesome. Is it possible to change the color from blue to red? @Clazzio

 

I finally received the samples for the leather seats. I'm still not sure which color resembles the caramel in my interior. Ultimately, i want all black with whichever color comes closest to the caramel color.

 

looks great! The interior was one of my biggest issues with the 2nd gen. All that tacky chunky faux brushed aluminum and silver. That looks MUCH better with it plastidipped black.

 

Maybe these pics will help?


Dark brown



Black body/beige insert, beige stitch..

 

Finally received the package!
If weather permits, I'll try to tackle the install this weekend.

 

Looks sharp!

Could you (or anyone else) take a photo of rear center seat belt and buckle bolted to the floor.
Not sure if I set it up properly...
Thanks

 

Got the seats in today. Honestly had the hardest time with the front seat bottoms, headrests and backs went on without much difficulty. Look great for the most part, couple spots that bug me, particularly in the back but I'll keep trying to get it how I want it

 

Thanks for posting. Are yours leather or pvc?

 

ordered 2016 all black ordered on the 9th an shipped on the 11th!!

i can't wait for the painful install

with a 1.5 YO and 2 newborns i definitely needed the leather for protection lol

 

Damn. Can you even fit 3 seats in there? I have 1 front facing in the back and will eventually have 2...looks tight already.

 

What i'm looking for is black body/black insert/beige or dark brown stitch. I think that would work best for me.

 

haven't test fit yet but my truck isn't the family vehicle so it would be rare to have all the kids but i figure ill have the front facing seat in the middle and the 2 rear facing on the sides.

 

https://www.tacomaworld.com/threads/clazzio-leather-seat-covers.414702/page-129#post-15654298

 

I believe that's an extra $100 for just a beige stitch plus the 6-8 week wait..albeit the light stitching provides a nice contrast

 

They are perforated leather, black with orange insert and orange stitching.

 

Anybody else have an issue with the passenger seat seatbelt alarm staying on after someone gets out of the passenger seat? I took the cover off and adjusted and it keeps going off!! I have to adjust the back of the seat, back and forth for it to reset? Patrick

 

1st I heard of that. I suggest you take a flashlight and look under the passenger seat. You may have hooked and pulled a wire or accidentally disconnected the connector. Look for the yellow wires and check it thoroughly. If needed you can pop the plastic covers over the bolts and lift the rear of the seat up to investigate. If you find a loose wire then disconnect the battery for 30 minutes before messing with the wires. That should give the srs system time to power down. If don't feel comfortable then take it to any local shop. They will be much cheaper than a dealer.

 

Like mrproduxn said, check your wires, adjust/reroute your straps and/or hooks. There are a few connections under the seat. I run my straps between them and a bottom of the seat to avoid issues like that.

Edit: Please update us about your findings and resolution.