3rd gens and 285's?

99% remove it

 

Awesome.

Thanks

 

285/75/16 Ko2 on 16" pro rims. 3 inch lift. No rubbing and didn't cut anything, still running the stock mud flaps. I really like this setup.

 

Cause ko2's are smaller than most 285's^^

 

Measures 32.8 just like a lot of other 285/75/16's so not really...

 

Go measure them

 

The 34x10.5r17 measures at 32.5

 

Wow in that size they are small. Is that mounted or unmounted?

 

Pretty sure I see you drive by my place all the time. Frequent the 15th and 15th neighborhoods much? Good looking truck by the way.

 

285/70/17 with 3 inch lift. Did CMC and a fair amount of plastic trimming as well. Could drive on streets just fine but any kind of flex when offroading was rubbing quite a bit so to play it safe i just cut it all back and got it out of the way. No real significant loss of power or mileage, does tend to hunt for gears going up the canyons. No regrets!

 

That's mounted, from what I understand most all bfg's actual size is .5 inches less than listed unmounted. I've just seen a lot less rubbing issues on the forum when people run ko2's so I think it makes a small difference.

 

You can worry less than if you were running say a 9" wide wheel.

 

Lol yeah Einsteins has me hooked

 

Not going to lie first look after my 285/75/16 installed I wish I went 315.

 

315s would be cool, It's basically a 35x12.5 which I heard requires a ton of trimming or LT

 

Hey man, I'm running KO2s now and had them on for about a month. how many miles have you gone through so far?

 

Did you wrap your mirrors yourself or did you have someone else do it? How much if so?

 

Yes I wrapped Them in matte black vinyl myself.

 

315s

 

That's what I'm talking about. I went from 285-->315. Love them