Norcal Spotted and BS Thread

Question, has any of you guys already or have installed the transmission skid and the transfer case skid from BAMF??

 

Almost to 100,000

 

I predict a bit of road rage will occur at that time of the day. Wish you luck!

 

Yup

 

Could you send me pics please, I need to see where do I need to drill holes for the cross bar, do I need to remove these two?and I'm guessing I need to remove this 4 bolts one by one correct?

 

Maybe I'll take a bottle of Jaeger for the road

 

Only way to figure out where to drill the holes is to mount the mid skid FIRST then hang the tcase skid and mark holes. If not your gonna be a 1/4" off.

 

Trying to figure out where to mount the fuel and water cans i... aquired... from the Army. Was thinking here for the fuel



And then do the same for my water can on the other side. Only thing is I would have to cut the middle plate out to get it to fit..


Next time I'm at my dad's house I'm going to use his welder and put some kind of retaining plate on the bottom for the can to sit in. And then weld on a bar that goes through the handles to the bed rack so I can lock them. Anybody have better ideas/suggestions? Trying to keep as much bed space as possible since the spare is mounted under the tent and rack

 

Yes! They won't fit properly so just drop them off at my house.

 

Just thought about it... my tent opens to driver side so I would have to put them both on the passenger side or rotate the tent and put them driver... damn.. lol

 

100,000!

 

I'm trying to snag some more since they aren't on any inventory list and there's just a warehouse full of them lol

 

X2

 

You need a new rack.

Let me help you by buying that bed rack from you.

 

Your wheels for my rack.... hahahah

 

NOOOOOOOOOOOOOOO !!!

5,001th page already

 

that cat

 

If you plan on attaching them to your bed rack just make sure you don't half ass the mount. 5 gallons of anything is going to be heavy - especially on the trails. All of the jerry can mounts I see have full support all the way around and not just through the handle like rotopax do

Actually - if you don't have a bumper/swingout that can support them, I'd just put them in the bed.

 

You have the perfect set up for Rotopax.

 

I was thinking that route also. Would mount perfect to passenger side. Entered into a bunch of giveaways on Instagram. We will see if I actually win a set of rotopax lol