Lifted 3rd Gen's with 265 75R16'S

6112s and regular duty Dakars with 265/75/16

 

What Lift do you have?

 

Any of you guys running 6112's have steel bumpers? How much lift do you get from the 6112s?

 

Looks good. What notch do you have them set to? How much lift did you achieve, think you'd be able to fit 285 with a cmc?

 

Is that a SSO bumper? Looks great

 

Was it the 1.5" add a leaf? Did you retain any rake?

Edit: I see you responded to someone already on the notch setting.

 

Correct, 1.5" AAL, when it was done it seemed to have a little rear rake to it, and ended up putting the OL leaf back in. Now for the most part it looks level, but does have a very slight front rake.

 

Parts are ordered will hopefully have them in soon. Being lazy and letting the dealer install it, that way I know I can take it to them while the truck is under warranty.

Thoughts on Cooper AT3's? Had them on my F250 and loved them.

 

Clips are set at 4/5 to offset the taco lean.
Sitting at 22" from center of hub to the bottom of the fender on drivers side and 22 1/8" on the passenger side, with the SSO bumper and winch...probably good for ~80lbs added up front.
Honestly can't really say whether 285s would be a go with a CMC. I think with the stock wheels you'd be okay, but that is a pure guess. I wanted to stick with 265s going in with the 6112s and I'm happy with the end result

 

Yessir SSO and thanks

 

I like AT3's a lot, but the 265/75/17s on mine look small with the about 3 inch lift I have on the truck. I think because the mud terrain tread looks more beefier while the AT are pretty flat rounded.

I'm leaning towards the cooper ST Maxx next round of fresh boots for the stormtrooper.

 

265/75/16 General Grabber AT2.

Toytec Boss 2.0 (roughly 1.5" of lift front and back)

 

How are those tires doing for you? Did you notice a difference switching to the e-load tires?

 

Love the tires...and not really. Granted I only had my stock tires for a few months, but any loss in power delivery or mpg hasn't been noticeable to me.

 

2016 longbed/5100s set to 0/885coils265x75x16son matte bronze Ray 10s

 

What tires are you running?

 

Yo mww982 I have Toyo open country At s

 

Finally got around to finishing my rear end suspension today. Icon Stage 3 kit (2.5" extended travel front coilovers, UCAs, 2.0" rear shocks, add-a-leaf packs, etc.). Next on the list are wheels, but my bank account still needs to recover...

 

How much lift did you end up with?

Considering this tire size too.

 

I was too eager when I started on the front coilovers, so I forgot to take good measurements beforehand, but it's about 1.5" over the stock OR. I'm looking to go a little bigger on the wheels (maybe to the 17" TRD 4runner ones). If I went with 265/70/17 I'd probably get another half inch of lift. I don't want to go too extreme; just a bit more aggressive look and good clearance for trail rocks and obstacles.