Yet another stock height request

I'm sure it's out there but searching google and forum... I can't find shit. I just need stock height measurements for a second gen double cab long bed with the tsb leafs. Front and rear please but just rear will suffice. Preferably a magnetic grey one...
Any info/links are greatly appreciated.

 

Tape measure might work? Every truck may have a slight variation.

 

I have plenty tape measures. Yes they work wonderfully. I think you may have misunderstood. I'm not stock. I need stock measurements. Variations will occur according to alot of factors, weight in the bed, fuel, age of the leafs....these things I know. I'm just trying to get some measurements from a similar vehicle to get a baseline for a new setup.

 

Gotcha I did misunderstand plus saw your sig pic an thought he's lifted. I have no clue how to help now..

 

Hard to find people on this site not lifted...

 

@ryanbitt

 

Did some pounding on ye ol google this is all I could find. https://pressroom.toyota.com/article_download.cfm?article_id=2643

 

I can give you DCSB Prerunner TRD Sport numbers if that will help. Measurements are at wheel centerline to bottom of fender.

Fr L 35"
Fr R 34, 7/8"
Rr L 36"
Rr R 35, 7/8"

No lift, TSB leaves, parked on a slight hill.

 

My truck when it was stock was

Center of hub to bottom of fender flare for all of the following

Front drivers side: 19.5"
Front pass side: 20"
Rear drivers side: 21.5"
Rear pass side: 22"

Edited to add: I cant read.. you requested DCLB.. these measurements are for Access Cab Long bed

 

I'm sitting at 25 3/8 both sides rear. That's with a camper shell. Progressive aal and 2" block.

 

Could you measure from the center of the wheel (horizontal) to fender? If I'm not mistaken your measuring from floor.

 

Indeed I was. I'm away from the truck but I'll get some better measurements in an hour or so. I'm running 265/65/17 on factory TRD Sport wheels if that helps.

 

Cool. Appreciate the help.

 

Check the suspension forum....I believe there is a before/after measurement thread that is a sticky....maybe the OME thread over there

 

From the wheel center to fender;

Fr - 20.5"
Rr - 21.25"

Left to right is very little variation. Parked on an uphill so YRMV.

 

I'll measure it when I go on break later, but yeah I am riding stock but with newer leaf springs in the rear due to the recall.

 

All good brother. I think he got some good replies

Hope you having a good one!

​

EDIT: nvm

 

You are the one I'm interested in.

 

​

 

With a mouth open like that a gentlemen may get the wrong idea....