NW WA Meet / BS Thread

I left you two beers. Just enough to tease the senses.

 

Why aren't you guys making 2 of everything?

 

:shrug:

 

looks crooked

 

Did you by chance slug that bend by the pivot man? Or only cut 2 of the 3 sided? Good work keep nimitz busy with beers!

 

I have no idea what any of that means. I'll just say yes.

 

wait didn't you get the mommy missle470 to not overbuild it?

 

He is trying to gently let you know that it will hold better with subpar welding if there is a sleeve inside that joint.

 

The god damn spare doesn't fit where everyone said it would.

 

when are you getting rid of the pizza cutters

 

I see that truck all the time as I work about 1 block from there...
I've seen the guy, and driven by when he got out; no nod or "sup" nada...

 

Have a brand new scan gauge for sale if someone is interested before I post it on the main board

 

Sam is an expert welding. #dimesondimesondimes

 

More often then not the material rips out from the stresses not the weld. The filler used for welding yeilds a higher tensil strength then the material.

 

Go Cougs

 

I'm new to the suspension install process.. All went fine but I can't seem to figure out a sound from the left front side sounding like "spare change jingling around" with any little bump in the road. I'm running King coilovers with Resi I bought used from fellow TW member.. they have probably 40k miles on them now (5-10k since I installed). I checked the tightness of my wheel lugs and most connection points behind the wheel. Think the coilovers need a rebuild already? I think I've heard the noise since install at only 30k miles. I don't hear it if window is up or driving higher speeds, but bugging the sh*t outta me. It seems to be a higher pitch sound. The lower sway bar is off and I don't see any other type of rubbing.
Anyway, I hope to join in a meet here soon when I can (and wifey allows).
Thanks!

 

I still have absolutely zero clue what you guys are talking about. Which joint? To me a sleeve would be a smaller piece of tubing to go inside the larger piece... is that it? If so, no, I don't have any of whatever size metal that would take, or any idea how I would bend it to a 79* angle to fit in there.

If that's not it, I'll go ahead and assume that whatever it is, I didn't do it.

 

Cougars and Huskies have a lot in common.


As an example, they both applied to UW.

 

do you remember where this pic was taken???