What Have You Done To Your 2nd Gen Tacoma Today?

The + 100 HP + 300 MPH mod.

Took 1 year for it to be cooked up just right.

 

I figured as much hahaha. There are a bunch of guys up in the central/Northern California area that are members on here tht could help you

 

passenger side today. Now just need to weld up.

 

now time for a brew.

 

Cleaned the throttle body. +1 hp.

 

So today I finally added another ammocan storage lock box to make my truck look a little more symmetrical. (Driver side is new box) And I mounted my 5gallon wavian jerrycan with smittybilt Jerrycan mount. I used two pieces of 3ft flat iron to cut 4 pieces of 17in bars to reach my bed rail. so the flat iron is twice as thick. I also got a set of 4 locks that take the same key so I can keep a minimal keychain.

 

Taking the slack out of the e-brake cable.

 

After my team lost I felt the need to do something so I washed Elwood and did alittle headlight lense restore

 

Really digging the setup!

 

Thanks! The ammo cans are extremely handy. I store tools, ratchet straps and rags in them. The new box will carry tow strap and tree saver. It's a saw box so it doesn't hang, just sits on the ledge of the cab. I can get them at the surplus store for like $25 then with some bolts, rubber gaskets and washers they are mounted. I cut the locking "flap" for the eyelet and grab a lock. Super simple, takes maybe 30min to mount the box to the bed rails if you know what you're doing and extremely inexpensive, I'm maybe in $30 for each box.

The gas can im excited to see how it holds up. One day I'll get another can for symmetry, but it works for now. I reallly just wanted to make sure it was "theft resistant"

 

Sweet. That flat iron stuff is my go-to for making mounts for various stuff that I'll be attaching to the bed rails.

 

Washed & waxed the Tacoma thoroughly cleaned the underside getting ready for Fluid Film meet up next Sunday
TOMB

 

Fluid Film!

 

Just put in the center for now! Lol

 

Busy day today! De-badged the truck thanks to the advise I got on here from @Buckwheat893 , @highriserkaiser , and others!

I made a jig for the fishing line and ended up doubling the line so it wouldn't break so often. Then I peeled off the adhesive and hit it with Goo-Gone for about 10min. Washed it off with warm soapy water, rinsed, then used rubbing compound to get all the remnants off. No trace left at all! But boy that took a lot of elbow grease.



After that I strapped all my tools and such to the MOLLE Panel from @docloco and got it all organized. I don't have a garage so all my tools live in my truck.



Finally I added the stickers that had been laying around! TW sticker, Bilstein, Louisiana State Trooper's Association Supporter 2015, 2016, and 2017!

 

Finally got to do a camp and ride 4 weeks post colon surgery!
Forks started leaking after 10 miles Dammit man!

 

@BigMacMcCoy What light bar is that?

 

Hey sorry jus saw your post but hopefully this will help and the sides are cut at 22.5 degree angle and not the best at drawing way better at actually making stuff

 

Turned out sweet man, nice job! That Molle panel is frickin awesome too