Tacoma on 20x12s

Here's my 2006 tacoma with rancho coil overs and ome rear leaf packs on 20x12 raceline injectors wrapped with 285x50r20 with some custom lights built by myself and a few other mods. Feel free to ask questions


Also I have an Instagram tacoma page called
@Tacomas_with_attitude
And follow my private Instagram
@thatsilvertaco

 

What size lift you running?

 

Running rancho quick lift in the front and ome Dakar leaf pack in rear about 2 3/4-3" overall

 

Wheels and tires look good!

 

Thank you! Tego

 

Would a 3in spacer in the front and a 2in block in the rear lift my truck 3in and keep it level?

 

Yes Riley because factory the front end is raked down about an inch so that will level it

 

How do the ranch coilovers ride?

 

Pretty good I have no complaints

 

Last question. Won't a 3in front spacer and 1in block in the rear do the same? Lift it 3in and level it

 

A 1.5" spacer will provide 3" lift up front

1" block in the rear will yield 1" and a crap ride

 

I'll bite, what the hell are you using for a tailpipe?

And I'm pretty sure putting spacers up from will gain you more lift than the size of the spacer since you are adding downward force on the spring which would preload them.

 

how hard was it to get the pods in your rear bumper? and how does the exhaust dump sound? thinking about doing both of those soon

 

I think its a kettlebell

Pretty unique IMO

 

Bumper lights weren't hard to install. Better off taking bumper off to do it. Make sure you paint where you cut out so it doesn't rust. Exhaust is a magnaflow muffler and a 2.5"-7" diamond tip dumped over axle. I personally think it sounds great. Real deep grunt and doesn't have that obnoxious rattle type noise like most v6s

 

I like your bumper lights. Exhaust looks kinda cool, too.

I had something nice to say.

 

Thanks Justin! Yours looks great as well!

 

What mirrors do you have on it? Looks sweet

 

How long did it take you to make your headlights?