What Have You Done To Your 3rd Gen Today?

Yeah that -12 offset and wider wheel would explain that. Wouldn't want mine any wider than they are now.

 

***************
Is your back lifted 5.5"? Any vibration issue? Need angled shims installed to bring the dif angle into specs?

 

After a good amount of cutting. They only rub at full lock!

 

************
Your tire is wider than mine (285 vs 275) and -10 is nothing compared to -12 in mm but mine (from pictures comparison) will look a lot more on the outside. Don't know yet, will see when installed.

 

No, Icon stage 5 is front/rear 2.5s (which is the shock diameter not the lift amount) with remote reservoirs, stage 6 is with compression dampening control valves (cdcv). I only have cdcv in the rear. Hence 5.5

 

I'll help you out with the little plastic trimming. I got mine dialed so we'll make short work of yours

 

************
How much lift did you get on yours? Mine is lifted to heaven, I guess 3 front and 3.5" back but I need to measure against a stock PRO since I forgot to measure before the lift

 

Looks great. I like what you've done.

 

I've trimmed some of the plastic already but it's rubbing on the body mount. I'll show ya on Saturday.

 

I'm about 2in front 2.5in rear (deaver u402 expedition packs)

 

Fixed my passenger floor mat.

 

I've only had one passenger since new last October so mine never moves......lol

 

Why do you have a DC then?

 

Yep! I got all the exact same parts (tweeters speakers and noise dampener) you did in earlier today so I should be good to go tomorrow. Started on the panel removal late-ish today and had to break away for dinner plans but I'll finish tomorrow. I did tweeters on Tuesday night and am loving that already!

Dude this is a killer write up! Been meaning to do this at some point and really appreciate the play by play, nice! That tape trick will save some time for sure. Still can't believe Toyota skimped on this..nuts!

 

Update, that was my mount for my step.
Half inch steel sheared right off. Went back and found the pieces...

 

Probably took most of the impact too I'm guessing, and perhaps your frame might turn out be OK after all. Good luck mate.

 

I did the same thing and bought a roll on eBay for cheap. It was a knock off brand. I got 50 sq ft for 110. I have a good amount left over just in case I decide to grow some balls and tear the rest of the interior apart. Did make a big difference to me.

 

How do you like it over stock. I want to do it too.

 

Thank you for this ! Will be dong mine soon, VERY annoying to have to keep adjusting it

 

For rear diff. U never heard of this?