Group Buy: Weathertech (Ends 2/23/10)

Delivered 1 1/2 weeks ago and installed. The fit isn't perfect but I love em. Thanks again!

 

for the people who have bought the grey ones....do they scratch or mark easily? just curiuos.

 

Got mine today!

 

Got mine yesterday and had them in the truck within 15 minutes of getting home (had to vacuum it out first). Great fit except for the rear driver's side. Anyone else have a lip that interferes with the door on their rear mat? I'm planning on cutting it when I get home today but was just wondering if it's a normal issue. I'll try to remember to take pics before I cut it.

 

It is correct that a tracking number isn't always given out, so just keep in touch with them and all will be good. Mine were delievered on March 10 and I had no idea that they were there. All is good, in all reality and fairness it was a huge flood of orders to Mike all at once. if anyone is ordering mats for a 2010 Tundra, be careful, the 2007 to 2009 mats do not fit at least on the passenger side of a CrewMax. Things have been changed just enough, so it doesn't quite fit the same.

 

got my replacement! yay

 

+1 ... I just called them and they were shipped last week on Monday and arrived Friday. I never did receive a confirmation number. Even after I called them 1.5 weeks ago and made sure they had my correct email address LOL!!

Anyway, gonna drive down today to pick them up. Got my fingers cross that they sent the correct ones!

Update: Got home with the mats and they fit great!! Just have to trim the little piece in the front, right corner of the passenger mat as described by others.

Thanks for doing this group buy Wingshootin !!

Cheers.

 

For those that ordered rear mats for the access cab 2nd generation, where did ya'll trim to make it fit?

 

^ I didn't have to trim mine because I've had that little cubby in the rear taken out for a while. I plan on having a custom box built to fit there sometime in the future. So if you still have that little box in the rear between the seats then you will have to trim some of the "lip" of the matt off, otherwise no trimming is necessary.

 

THANKS! I thought bout unscrewing the cubby out and seeing if once the mats are down if I could just put it back on over the liners. You think that'll work?

 

Disregard.

 

I tried that very thing but the screws weren't long enough.. or it might have been an alignment problem. I'll have to try some longer screws and see if it works though! Also, you will only be able to screw in two of the four holes unless you drill two holes through the mats for the other two.

 

I appreciate it the info. I'll see what I can do since I really don't feel like cutting the new mats up.

 

I took off the 4 bolts, removed cubby, laid liner down and was able to put the cubby back on with no problems. However I only screwed 2 bolts back in instead of 4 but its pretty solid so it doesn't seem like its gonna move. No cutting afterall.

 

I did the same and is seem solid enough with only 2 screws

 

Deleted

 

Got mine!!! Badass!!!!

 

i havent receive mine yet :/