Florida B.S. Thread

I dont have any personal experience but I don't recall ever seeing amd returned when I worked at harbor freight. If you do decide to get, it find a 20% coupon and buy other name brand blades they'll be more expensive but will last longer. Also harbor freight does also sell a portable band saw.

 

Thanks Kenny looks like the Diablo blade is almost the same price as the saw lol

 

That's Harbor Freight for you...

 

Okay so maybe I'm inept or a terrible mechanic, when I went to change the front amber turn signal on my 2013 the bulb wont come out of the socket. Like it is too big and id have to take the entire headlight lense off to replace it. Checked other side and same issue.

 

Time for retros

 

Something is wrong then. The corner light ? Or the one by the grille

 

Does this look like a transmission breather? (Bare with me its hard to even see in person)

 

Seems that the hole has warped/ melted from continual use of the drls. Rat tail file massaged it so it would fit again.. Figures the 05-11 had issues from too much heat from the amber bulbs so the 12-15s would as well

 

I'd say you are correct sir

 

Never been a fan of plasti dip, I think teenagers and ricers ruin their vehicles with it.... But I did my back bumper today in white and it turned out pretty legit (was base model black) .

 

Looks great man

 

(Crickets chirping)

 

Sitting outside with actual crickets chirping

 

what kind of plugs are guys using? 45,000 miles should I replace the wires also

 

You have iridium spark plugs, so around 100k to 120k miles and there are no wires.

 

so I dont need to change them until than? The dealership after every 30 is that BS?

 

Sorta, in Mid Production of the 2104's they went to iridium plugs. I have a 2014 and I have the Reg Plugs, so I have to go every 30k. You're definitely good until 100k.

 

Should I check the plugs to see what they are truck was made in 3/15 In the lonestar state Thanks scooter

 

My Tacoma was also built 3/15, it had the same plug set up as my previous 08. Just standard plugs, NGK on one bank and Denso on the other. I have used Both NGK and Denso when I replace them and couldn't tell any deference between them. I think on this truck I did Denso at 30K and now have NGK. I should hit 75k Mi next week

 

I appreciate it the ngk are pre gapped right just a simple replacement of old to new?