FS: 13" 650lbs Icon Coil Springs

$50 bucks. Nothing wrong with them, just replaced with 14" Kings to get rid of my preload.
Pick up preferred cuz shipping is another $50

 

Would these be too long for 5100's (3" lift)

 

Won't work

 

Fork, thanks for the response, out of curiosity how much lift do these provide and what length strut are they made for? Long travel?

 

These came off an extended travel Icon 2.5 remote reservoir shock, were replaced with other springs which is why these are for sale. They will work on most 2.5" Body coilovers with flat perches/collars. The lift height however would depend on preload and your specific trucks configuration.

 

If theses are still available Ill take them

 

Yep, shoot me a PM with your number to arrange pickup

 

For you own knowledge, the issue is the ID. These are a 3.0" inner diameter to match to a 2.5" coilover body. This will be the case with any Icon/Fox/King/etc... coilover take off springs.

Bilstein 5100s for example have a 46mm body which is about 1.8", these use a more narrow coil spring. I can't find the exact ID spec, but you can get the correct springs through OME, Eibach, Headstrong, Toytec...

 

Also the spring seats. On the 5100 billies they have indentures for the chopped coil ends whereas most 3" coils are flat top/bottom so they can stand like in my pic above. FWIW, Bilstein 6112 shocks can except King coils and vice versa

 

Bump. Will ship also but it's $50 flat on top so not really worth it IMHO but up to buyer

 

Location?

 

San Diego

 

I just shipped these same coils via fed ex from Austin Tx to Fresno CA for $34 which included $250 liability. Would've been $31 w/o the liability.

 

Yeah I shipped two of mine to North Carolina. $50 even so if buyer wants to pay for that in top I'm game

 

Up. $25 each

 

Bump

 

Would you ship I paid it ?

 

Yes

 

Sold?