Lift help

I just got my 2010 Tacoma 4wd and I already ordered my 18x12 fuel hostages, and 33x12.5 Toyos prematurely. I’m wondering what I can do to clear them somewhat effectively and cost effectively. Max budget say around 1k.

 

In addition to a lift you're going to need a cab mount chop so factor that into your budget.

 

Simple 3" lift setup should work. But you will need to do a good deal of trimming plastic and a cab mount chop. will need new uca's as well

http://toyteclifts.3dcartstores.com...with-Bilstein-5100-Front-Coilovers_p_364.html

http://toyteclifts.3dcartstores.com/OME-TAK--OME-Tacoma-Suspension-lift-kit_p_231.html

 

In other words OP. Your 1k budget won't cut it.

Hope you have a place to store the wheels and tires.

 

Throw some 5100s on the third notch and get an AAL for the rear.

Super inexpensive

Note: this is not the typical lift I would recommend. But will get the job done.