What have you done to your Tacoma today? 1st Gen Edition

Guess there will be no truck parts for awhile

 

Not with three of them it won't.

 

I only have Asian passengers. Monday through Friday I have two Asians in the back seat and a whitey in the front passenger seat

Thus whether in my 17 PRO DCSB or 01 DCSB poverty spec, everybody has same level of comfort

 

Not overkill at all. I'm running it. So far so good. Do yourself a favor and get a few spare fuses. you know, for that one time you decide to venture off on your own and the damn fuse blows when you are trying to get yourself unstuck. you wont have to huff it uphill for a couple of miles

that signature

 

Go with this one instead. Worth the extra $

Smittybilt GEN 2 XRC Winch | 9500 Pound Load Capacity | Syntethic rope

https://www.amazon.com/Smittybilt-9...coding=UTF8&psc=1&refRID=6AH6JXK396H9YYDQEZ45

My friend has the one you linked and the steel cable is already fucked up with kinks in it and its not that old. A synth line is safer to use too and saves on important nose weight.

 

The cost of pro boxes is why I bought my last three boxes used. I got my current late model Snap-on box dirt cheap from some poor bloke getting a divorce

 

Bedlined front end and slapped new headlights on

 

I hate that...nothing like chasing shorts..

 

Same boat for me, just got a cornwell box and some pneumatic accessories

 

Whoever wired the thing did it super hasty and grounded the lighting with a self tapping screw and a ring terminal. The self tapping screw was tapered too so it barely made contact with the terminal. So I cleaned it all up soldered on new terminal and bolted it to a clean spot inside on the frame. Much better, no more dimming when the brakes are applied now.

 

Shiny new toolbox?

 

Yessir

 

Cornwell has some nice looking boxes this month in the flyer but our cornwell guy is kinda a dick so I don’t buy much from him

 

I’ve worked out of a kobalt and husky box for awhile and decided to uprgrade to something that will last. The box is a repo box so I got it for a good deal was 8300 new

 

I washed the outside, detailed the inside and greased my shaft.

 

Installed my new rear shocks. Pro Comp 9000's I know allot of you don't like them but I like a stiff riding truck.

 

This is supposed to be Scott your truck. Dirty dirty dirty.

 

Got this for my 1st gen today

 

Must be a beige Camry?

 

Ah, opposite for me. Cornwell guy is awesome and the other guys suck. Especially Matco, guys at the shop run him off

I unloaded Toyotas all day long off of rail cars, that power curve is horrendous. The 4 cylinders felt like they had way more low end power. The stick shifts atleast feel underpowered, way underpowered

I didn't buy my truck brand new....so that 40k you just calculated is a bit off for a 15 year old truck.