Clazzio leather seat covers!

Just finished the install, went with the Trd pro kit with blue and black stitching.

 

Can y’all post pictures of your drivers seat and also the time you have had them installed??

 

20 months

 

Is the back rest taught?? Like a gap between the seat and the cover?

 

no gap

 

Does anyone have a combo of black/beige insert/beige stitching? I’ve only found either beige insert or beige stitching but not both. I’m real close to pulling the trigger but I’m afraid the combo might be overkill and give the seats a cheesy Walmart look rather than a custom quality look.

 

Do you use any conditioner or cleaner?

 

Mothers VLR once per month

 

Really debating on the bottom combination. It’s growing on me. Any samples of the red that would be sent

 

Have you had to retighten or adjust them? The bottom part of my driver seat where you sit is starting to get that impression that most leather gets after awhile. But I haven't had mine all that long. I used leather conditioner on them and I think it made them looser.

 

I made 1 adjustment the 2nd day. Thats it. After a year or so the bottom (butt) areas are very slightly puffy just as my factory leather became in my other vehicles. Nothing extraordinary or "loose". I would suggest, as new as yours are, that you lift/roll up the top half and pull the bottom tabs tighter from behind the seats. Seems like you may have not pulled the 3 tabs tight through with enough force. They are a bear to grip and pull but must be done. Then stretch the hook strap/ties as far as you can to keep them tight. After that you also may need to untie and re-tighten the draw string around the bottoms. Then pull/unroll the top half back down and tuck in the stock plastic flap. Those 3 tabs were the biggest source of installation finger pain and I believe was an integral part of the install. I truly believe if you follow this step you will get the tight fit required for a long lasting good fit. Hope this helps.

 

Here is what my seats are looking like. Strangely the passenger seat is looking the same and no one has ever sat on it yet. I'll check to see if everything is tight enough today, but it seems like rubbing conditioner on the seat is what made it appear looser.

 

Any recent discount codes ?

 

subbed to remind me to order a set

 

any idea how to fix the cover at the plastic part at the headrest ? also how to cover the bottom of the seat cause a lot of wire and plastic sheet

 

Any visible wear on the drivers bottom bolster, where the recliner lever is located?

 

Maybe this has already been answered and if it has been I apologize for asking again, but do the seats have to be removed from the vehicle to install these?

 

No. Most people leave in truck to install.

 

OK sweet. Man these look too freaking good to just be seat covers. It almost seems too good to be true.

 

Worth every penny!