What Have You Done To Your 3rd Gen Today?

Ouch !!! But that stinger helped you win

 

I have the icon stage 5 and the Fox level 4 with compression front and rear...trying to decide which to use . How are you liking the icons ?

 

That is the only area that I have excessive road noise from. Nice

 

Nice job . Looks great

 

I put those decals in the tailgate lol .. Next up Grille

 

Do yourself a favor and swap the plug out for an Anderson Power Pole, they make panel mounted ones to go in your truck.

I had issues with my CVT tent power cable and swapping to the Anderson plugs solved it.

 

That second button is for my light bar whenever that shows up I just got it installed and did the wiring so I don’t have to rip up the inside of my truck again. The text lights up with the panel lights and the truck symbol lights up when the accessory is running.

 

i did the same!

 

Just out of curiosity, are spacers absolutely necessary for 285s?

 

OEM. Ordered from my local dealer at cost. 'Install was simple. I'll post some pics tomorrow.

 

Not necessarily. Wheel offset is a factor.

 

I like how the icons perform a lot. Never used Fox so I can't make a comparison.

 

i have a 2wd i put 265/75 on stock 16" sr5 wheels it rubs on passenger side when i turn sharp not too bad tho the tire isnt getting ant bigger stock suspension also i like it i went back after 1000 miles and checked torque all was good

 

Made some adjustments to my sway bar. After installing Kings had almost no clearance. Maybe 1/8 on passenger side and 1/4 on drivers side. Now have 1/2" on both sides...

 

Got my 2017 Off Road 4x4 Inferno on September 3 and have started the upgrades. TRD Pro Skid Plate, TRD 16 inch beadlock wheels with 265 75r16 goodyear wrangler duratrac tires, TRD Pro grille, led dome lights, diode dynamics hid low beam head lights 6000k, replaced fog bulbs with Optilux Xenon Yellow Halogen Bulbs.

 

I chose to keep the stock wheel size at 275. Beyond looks, I didn't want the hit to MPG. Hoping they won't look small if I lift an inch or two.

 

Can you explain a little bit more? I planned on snipping the cigarette lighter end off and running the power direct [with a disconnect in the middle for when I take the tent off the truck]

 

That's basically what I'm talking about. I can take some photos if it would help

 

What’s the brand?

 

Never gonna complain about pictures! I need to find an easy to way to make a safe quick disconnect for the RTT/rack as it is disconnectable from the truck.