Central MA Fluid Film application day 10/21

10/21 huh?
hmmmm.......

 

Be good to see you again Chris

 

Likewise.
I have a few crazy weekends coming. May see if I can do this one too.

 

That's what I am hoping for. Reds are my preferred.

 

What I am seeing for stout there.

THAT’S WHAT SHE SAID (Milk Stout - 5.6%) - A sneakily complex beer, "TWSS" exhibits flavors of milk chocolate, fresh roasted coffee, caramel, and even a hint of smoke. It is absolutely loaded with flavor for a 5.6% beer, and the inclusion of Lactose takes the edge off of the dry, roasty notes found in a typical stout. The adult chocolate milk shake. . . soft, creamy, and luscious while maintaining supreme drinkability - just the way we like it! A beer that is notorious for converting ‘pale’ beer lovers to the dark side!

Trail Magic sounds interesting too. Pilsner.

 

@LivinLoud

 

Ordered a 5-gallon pail of Fluid Film last night.

• Check the list in post #2 of this thread, if you're not in the list I won't be expecting you.
• I'm planning to get started around 10am on the 21st.
• Prior to arrival: remove anything from the bottom of the truck that you don't want sprayed, or is in the way of the frame (skids, sliders, etc.) and drop the spare tire.
• We'll pull the frame access plugs in the front end as we get you lined up if you don't want to pull them ahead of time.

 

Thanks for the heads up on this, definitely would have shown up with my skid and spare still on.....now to drop it....this will be interesting/fun

 

Spare should be easy and quick to drop.

 

Should be, but sometimes the mechanism gets stuck if it never gets lowered. I want everyone to try it before they show up. If the spare's out of the way, I'll give the winch a good coat of Fluid Film as well.

 

Factory skids shouldn't be a big issue, I'm concerned with stuff that blocks access to the frame. So, if something is in the way and you can't see the frame rails front to back from underneath the truck, those areas you can't see are going to be difficult to treat.

 

I'd hope for a '17 that the spare mechanism isn't already fucked.

I have the TRD pro skid so I'll just have to see if it is blocking any of the frame.

 

I have already taken my spare down once, just to be sure I wouldn't have an issue if ever needed.

 

I have nothing to remove as my spare is on my Hitchgate, and I have no sliders or anything else in the way.

 

List is full. Everyone is more than welcome to come socialize but I'm capping this at ten trucks. If you happen to be here and we finish the list with material and daylight to spare, we can hit yours up too, but don't count on it if you're not on my list.

 

Anybody want any freebies? I have the 2 rear cubbies from behind the back seats from my 2015 DC someone can have. Also have a set of Husky Front and Rear Mud Flaps that were on the truck for a week someone can have. Plus I have 2 long bed bed caps if someone needs them as I have the metal KB VooDoo versions. Also have a set of Hi Lift mounts that go in the bed rails that were made by ATO for free.

 

Dam, not sure if I could use any of this atm, but sweet deal for some one that can.

 

@mach1man001 Let me know if you and your buddy want to come by, I'll start a standby list and put him on it.

I just looked last night, I bought a two gallon kit last year with the gun, etc, and still have almost a gallon and a half left. Supplies shouldn't be an issue, especially if you want to bring yours too.

 

That's a awesome offer. That ATO hi-lift holder is worth $70 by itself. I'd take it but I already have the same one. I need to get the shovel/axe holder. Lol. I'll grab the cubbies if your giving them away. I need to cut a set and I could use them as a backup if in case I screw them up

I'll let him know. Pencil him in if you can. He already said he want's it done

 

k, ill toss my kit i got last year, still nicely packed in the box.