What Have You Done To Your 2nd Gen Tacoma Today?

Pine tar

 

Mounted and wired up my single row 41" light bar on my roof basket. Happy with the mounting and light output. It sits a lil high on the rack but that will be fixed once the new fairing with the cut out is done.

 

I'll need shorter nails 1st...

...I'll find some of the old Hubba Bubba super bubble gum

@boogie3478 ...I'll gob pine tar on a few too

 

Looks great, don't forget the annoying visor labels can be used for extra patches

 

How did you do this?

 

Mydio 2 Pack 10cm Wide 1 Meter Long Self Adhesive Hook and Loop Strips with Sticky Back Tape Fabric Fastener

https://www.amazon.com/gp/product/B06ZZDNWBL/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

and scissors

 

Thank you!

 

Thanks! Love the rack

 

Who doesn't!

 

BTW, that adhesive sticks like tar. You can use it on non-velcro badges or anything else you want to hang up there. I used some to make a Halloween costume since I suck at sewing.

 

Right on! ​

 

The uni filter mod.

 

The gum is for the tops of the nails.

 

Bought some TRD FJ wheels today. Going to finish out the last little bit of my upgrades and take a break for a while. I split my time up with 6 months working on my truck and the other six working on my guns. In the next 2-3 weeks my custom gauge face will arrive/installed, new wheels will be on, OEM backup camera with override switch, some more interior lights, and depending on if I can find one that I like.... a dash cam that loops and is discrete.

Next year around June-July I plan on doing the two biggest modifications to my truck. URD supercharger (probably stage 2) and installing a rear differential locker. I'll also probably switch out my side steps and maybe some small suspension stuff (i.e replacing the leafs with springs, changing the digressive shocks to progressive shocks etc.)

 

Your sig made me LOL

 

Sorry for the super late answer. I've been in Louisiana with little to no internet for the last month. Mine broke off in the carwash so I had to have the dealership get what was left of it out.

 

Just lowered my license plate thanks to @ACEkraut and his LM-1215 bracket! Easy install and now my light bar will work to its full potential! Thanks again.

 

JB Weld?

 

Finally got around to painting my skid plate, don’t even notice it anymore!

 

It was last night, not today; I traded up from a '06 DCSB TRD OR to a '15 DCLB TRD Sport.

The old:

133k Prerunner


The new:

22k 4WD


Swapped over my LED switchback bulbs, but still need to grind the resistor and wire in for the white LED support.
The truck already had the window visors and bed mat, so I don't need to get those.
Need a stubby antenna, and a bass solution (I had an aftermarket single-din w/factory JBL, and now I just have an aftermarket 7" Kenwood DNX773S w/an iDatalink Maestro RR).