What Have You Done To Your 3rd Gen Today?

Had my lift struts for at least a year. No Issues and work great. Just needed to make slight bend on the K&N housing to clear the passenger side strut.

 

you got any pictures of the back side of that grille?

 

Not really. Most drying towels use waffle weaves, not microfiber. Like I said, microfiber isn't good at trapping dirt, so anything that could have fallen on your paint will get dragged across your paint while using microfiber. Waffle weaves have larger sections to hold anything it may have picked up. The best way to dry your car/truck is after it's thoroughly cleaned to use an electric leaf blower to get the majority of the water off then use a waffle weave towel to absorb the rest.

I don't know what detail shop would recommend a microfiber towel that doesn't do paint correction.

 

Seconded. I never waxed my truck in 5 minutes before. Amazing bead, and it does a great job keeping the dust down.

 

Which bar is that? Link? Think its what I might want for Christmas.

 

Forreal? You even quoted it in your question.


http://bfy.tw/EXlV

 

So many here think it's easier to have the OP post them the link rather than doing a simple search themselves!

 

Laziness.

 

Wow. I don't appreciate the assumptions. I searched first, then didn't know what size. I re-read the post, didn't see the size, so asked for a link.

Try again and be helpful this time?

Here are your options...

5D Light Bars

7.5" 60w - 4,800 Lumens
13.5" 120w - 9,600 Lumens
21.5" 200w - 16,000 Lumens
31.5" 300w - 24,000 Lumens
41.5" 400w - 32,000 Lumens
51.5" 480w- 38,400 Lumens
51.5" Curved 500w -40,000 Lumens

Thanks in advance.

 

https://caliraisedled.com/collectio...ota-tacoma-32-light-bar-lower-bumper-brackets

 

Tape measure + truck = no need to ask

 

They tell you the size needed on their website

 

Same reason I bought my softtopper!

 

So I did a thing over the weekend.... Went up to 285/75/16s cause I couldn't pass up the price of $580 for all 4!





Before and after:

 

Love the Redline tuning struts on the group buy. Install turned out to be rather infuriating due to my POS rivet gun. I had to advise the wife to walk away as I was fuming at one point when the gun was stuck to the rivet and wouldn’t compress the rivet or release. But I worked through it and eventually solved the problem and the my marriage is still solid!



Also this week I used up some leftover Dynomat I had laying around and did my best to add some weight to both front doors. I didn't have big enough pieces to cover the whole panel so I reinstalled the plastic sheet and foam baffles.



I'm not sure how much it helped. I did the Subaru speakers last week and am really happy with the new sounds.

 

Dang then I must be messing up all my rigs and cars for the past 8-9 years .
Guess I'll just keep doing it.

 

Man I feel bad for the person who goes to buy your truck. They wont know what it is... That being said great looking set up!

 

I sold my factory tires for $600... Only had 900 miles, then used that towards much nicer tires.

 

It might look okay from a distance but under inspection lights you'll see a bunch of micromarring. If that doesn't bother you than go ahead. Some people are fine with going to a machine wash too; their vehicles, not mine

 

Lmao...nope no scratches on my vehicles .
All washed dried and waxed in my wash bay with lights. Maybe the pick you have is from a moron that used a cloth to try to dust there vehicle .