Colorado B.S. Thread

Keep screwing the slide hammer into the tool while it's behind the bearing. What your wanting to do is use the tool to squeeze the 2 jaws out.
There should be a small rod that goes in the end of slide hammer to help you twist

 

Yeah. I’ve even tapped it around with a hammer. Still no go.

 

Look like you broke the inner lip?
Maybe @CharlieCafe or @aero3685 have a better idea?

 

Time to break out the dremel

 

Also use a dermal and grind away that rust before ya install the new seal. That way you don't rip the new seal

 

Almost looks like it may need to be cut out now, although you should still have enough on the back of that bearing shell to hook onto. It took quite a bit of force to get @aero3685 's to move, but we also used a slightly different blind hole adapter that has more surface area.

 

When you use the terminology "blind hole" I get some weird tingling sensations

 

Thanks guys

Dremel to the rescue! And while I was at it I pulled my sway bar. We’ll see how that feels

 

You've been without your Taco for far too long already

 

- that's sig material for someone right there

 

You sound like my wife..... "I shouldn't leave him alone, he doesn't have any projects...."

 

I meant that more along the line of "you have no taco to play with so now you are fantasizing in weird ways..."

 

The problem is I fantasized in weird ways before the taco was put in quarantine

 

1st gen Cab tub 2.0. Should be faster this time!

 

All that for 31s....

 

Some Friday night humor for you guys

 

Zero lift life!

 

This is quite a good laugh

https://www.reddit.com/r/funny/comments/77p1s3/the_internet_was_made_for_this/

 

POTUS signed a new Executive Order today that expanded the recall authority. Bring back retirees to active duty in times of national emergency.

@lobsterbait @CO MTN Steve @SilverGhost You guys ready to come back?