Ontario BS Thread

Remind me, why do we need ecgs bushing?

 

Needle bearing being shit shouldn't cause damage. Just an annoying vibration that goes away while in 4x4. So you could technically put a new seal in and drive it until you get the new ECGS bushing.

Whats the part number for the seal you need. I wonder if its the one I have on hand.

 

vibration from lift. Shitty play in the front diff that causes the CV to vibrate.
Amplified with lift.

if you feel an annoying vibration that goes away with 4x4 you need it.

Its a $60 part. I did it when I did the lift so I don't need to waste time later.

 

$30 USD to ship one damn bushing

RIPOFFFF

But I needed it so I didnt have a choice..

 

$12 90311-47027 Toyota Oil Seal - 90311-47027

90311-47027

 

90311-47012

 

Oh, I see. I am good for now, don’t have any vibrations for the past 10K

 

you're lucky. many report it.
I figured for the $60 I just did it.

I think @Jake4848 did it as well

 

Thats the same part as

$12 90311-47027 Toyota Oil Seal - 90311-47027

90311-47027, they share the same product number. Two different numbers for the same part

 

then I think I have it lol.

I cn check tomorrow. all my parts are at my grandparents. they have more space in the garage than I do

 

I never had vibes but I just did it as a preventative measure when I put my lift in. Heard enough stories about vibes when lifting. Plus it was pretty easy to put in and only added about an hour to my install time.

 

You don't. lol

 

I don’t have any vibes either but I think the busing is stronger than stock and allows for tighter tolerances creating less wear. So it isn’t a matter of if you’ll get vibes but when apparently. I’m getting it as I’ll have the front diff it anyways so might as well lol.

 

How can I lift and NOT do this ecgs amazingness now.

@Joe23 You have the tooooool available for this? Or did someone in Ottawa have it?



Purchasing

 

I haven’t had it for like 4 years. Wouldn’t be installing it but because of the regear I might as well.

 

So I do the lift and get a vibe, I will just want to dick punch myself so hard.

I am pretty sure I should just do it, so I dont regret NOT doing it. if it was $500 I would be a little more 'uh im not sure'.

I think its better to be safe.

 

What size gears are you getting?

 

same thing I did.

 

its $60USD.

If you need it you'll have a vibration that goes away with 4x4 being on.
Like Jake said its easy to do so that you don't need to worry about it.
But its also an easy job so if you don't do it and end up with the vibe you can do it later.

I've just heard stories of guys having the vibe without lift and that the bushing was the fix. Some said they even had dealers do it as a warranty job.

 

From what I understand its worse if you have a 3"+ lift.
And its mostly if you have high CV angles from what I've read