What Have You Done To Your 2nd Gen Tacoma Today?

Before
After

 

Well good luck with that I was at Carson 86-88

 

Repurposed the Hilift mount I made for the long bed to work with the short bed I wouldn't have thought there was a difference

 

Oh i like those headlights. Whered you get them?

 

Scored a set of new oem roof racks on Craigslist. Saved a little bit.

 

Spent the day yesterday with a few of the other guys from around New England spraying our frames with Fluid Film to help protect them through the winter. Finished off with a trip to Treehouse Brewing for a couple of pints. We had a first gen with a 500 mile new frame, mostly second gens, a pair of third gens and a brand new Tundra TRD Pro. I was too busy crawling around under the trucks to get any pictures but there were some nice rigs in my yard yesterday.

 

They're retrofits made by Peter at Insight Retrofits @A7xschecter6661

 

Do tell. My seat is doing the same.

 

I have updated my profile pic on my 2006 Taco.

 

Helped a neighbor move some furniture to his rental house in the Adirondacks. My new ezhauler 6x12 towed like a charm. Easy peasey especially after getting the rear leaf packs rebuilt. 13.1 mpg

 

Some upgrades
OEM Roof rack
Tri-Fold bed cover
TRD intake
2017 predator side steps

 

I placed my switch on the driver side next to the cubby. Ran a constant 12v and grounded in the tail light area. Drilled a hole for the switch and the lights in the bed itself.

Post up when you're done! This is on my to-do list and I'm curious how others are doing it outside of the dog platform thread I follow. I think I'm going to hinge mine so it folds up if I need it to.

 

Put in my MOLLE panel from @docloco !

 

Changed the oil in my front diff yesterday. Mmmm quite aromatic!

 

So I know this has been covered in other threads but it's worth showing IMO. I tore my front ADD apart today since it will activate just fine when the trucks cold. But drive it for 25 or 30 minutes and I get the 4hi blink when I try to engage. 204k on my truck and this is what the inside of the ADD looks like.


Looks brand new but I haven't been gentle on this truck.

Then I noticed this.


I'm going to do some cleaning and bending of contacts, add a little contact grease and see what happens.

No arc marks on the motor either but I still might solder.

 

I tore a starter solenoid apart on my '99 some years ago at about 150K mi. Everything was scorched as hell inside, not just the main contact, but the relay/solenoid plunger thingy contacts... the point: clean any and all contacts you can get to in the whole circuit, beef up and solder everything you can reach, grease or lacquer the connections wherever you can... good, 'clean', 'fast' current.

 

Yessir...no pics but done and done. Even applied power using the Power Probe. Smooth operation. Even busted out the good grease.

 

DTRL to the plate bumper. They also work as turn signals.

 

Pretty cool! Can we see some night shots?

 

Thanks man!!!! I'll take some tonight...