Too Much?

I'm probably being over protective but would this be too much weight in the bed over about a 12-15 hour period?

 

No

 

Are your bump stops on the leaf springs touching?

 

Your truck is a Quicksand, she's fine.

 

Not sure but I’m going to check!

 

Had well over 400lbs - 600lbs of tile in my bed for 12 hours, lowered the truck to the maximum, but reset after everything was dumped out. Truck is doing just fine.

 

If you are not riding on the bumps you are probably fine.

Anyone know if those tires would rub on a third gen with no lift?

 

might need to trim a little of the frame but should be fine.

 

You will be fine, I had a 1000lbs of sand in my 2nd gen and it was not even on the bump stops.

 

I trimmed a little of the fender plastic on mine, but they fit perfect. Slight rub at full lock in reverse, but nothing i'm concerned about.

 

I was a little nervous hauling this thing home today for my 65 mile trip home from work. It was fine and the plastic bed didn't even crumble.

 

My guess is...you put those tires into your quicksand and then go get a coffee for the road ..... You get back and they are gone....

Quicksand CANNOT carry that kind of weight..... Good luck finding the tires...!!