What Have You Done To Your 3rd Gen Today?

Have anyone use Heise LED lights?

 

Pelfreybilt Front bumper line x coating

 

The trd pro grille looks great, but I can't bring myself to spend $400 for the OEM piece of plastic or even $250 for the aftermarket...of course plus shipping. Both numbers seem like rape.

 

1.25" Spidertrax Spacers installed that I got from member @siznarf on here with the help of my more mechanically inclined and full tool chest owning friend

This is the way the stance should have came from the factory..and yes we did pull the tires and check the tq as instructed after 50 or so miles.

$15 in the red Gel thread locker stuff... not sure if they are ever coming off. Lol.

Oh and in other news we noticed that my front passenger hub cap was missing?? Stolen, fell off on the highway, lost in the pine barrens? We don't know! So I ordered a new one and pick it up Tomm (dealer refused to cover under warranty since I didn't have the old one to turn in to warranty). I also did a warranty exchange on my toyota rubber mats since they were curled and not hugging the step plate at all, so all new mats that are perfect.

 

Installed some led lighting in the bed (wired from cargo lamp relay so they turn on with door switch & keyfob). Also removed air dam

 

I will have to agree with you on that. I think they may as well replace and grease all at once. Thanks for the info.

 

we're twinsies!

 

Installed Salex OCD Organizer with the help of my assistant Joanna.

thanks @salex !

 

Looks great. Where is cargo lamp relay located? I want to do something similar. Thsnks

 

I got that organizer as well as the top tray. I'm thinking of chopping one of the sections of the organizer off to get a little more room for bigger stuff in one corner or side?

 

Its not what i’ve done right now... but what i’m about to do.

 

that's a good idea. a simple hack saw should take care of it. I've noticed using power tools sometimes melts plastic too fast.

 

Does anyone with a prinsu cabrac have the dimensions for it? I am trying to spec out some sizing stuff for it.

 

@jvill4 has one

 

Difficult to remove? Any advice pointers? I don't want to F anything up on my new ride

 

dude honestly, its not hard, 5-6 clips to remove, 4 underneath, and 2 on the inner portion of the bumper cap. i picked the fasteners off with a flathead screwdriver. then you gotta pop the plastic bumper off the chrome caps to be able to pull back on the bumper caps, you will hear a few pops, 3 for the black plastic, and about 2 -3 for the chrome piece. the metal bracket the holds the upper corner broke on both of mine. they won't effect the ability to hold it into place when they are reinstalled. @Rob Daman has some good DIY videos for this mod on youtube.. or you can mssg him on IG. @Rob Daman

 

Nice stance!

 

sup tuefel hunden. I did the same thing to mine because the stance sucks out of the factory.

 

I went with VLEDS for the Low Beam/High Beams and Fogs and am very pleased...

 

I was using HIDs for the Low Beams but VLED now has a Micro LED that is awesome so I have removed the HIDs and put in the Micros from VLEDS so far so good, maybe, just maybe, the HIDs were a bit brighter, but not much,and I got rid of a ton of wiring for the HIDs. Very happy!