Help with quick wiring of Ditch Lights

That makes sense, I didn't know it made a difference on the switch they used. I'll try it out, thanks

 

I suggest hooking that ground on the body or the positive on the battery last. Or at least have that switch wired up. My wires touched and I blew the fuse. It's 30 amp fuse

 

Ok I'll do that. So connect the switch and then the black to ground, and then the red to positive?

 

If you need a pic of under the hood I will get that for you also

 

Yeah if you could that would be really helpful! I think I know what to do but don't want to screw anything up.

 

Lol. Give me a few

 

Ok here you go in order
1 Positive
2 Negative
3 Relay
4 full view no fingers

 

My bet is
Black = Ground
White = Power
Blue = remote turn on wire

 

I hooked up everything as pictured, and still no luck. I'll upload a link to show whats going on but plan to call CaliRaised in the morning

 

https://vimeo.com/241124223

 

Check the fuse? They worked with direct power right?? Or switch white and black. After that I got nothin... sorry.

 

Yeah they worked with direct power. The issue is I can't get them to respond to the switch and turn off. I switched the wires and same problem. Thanks anyway for your help and I'll get in contact with CaliRaised

 

They are a good group of guys. @CaliRaisedLed This gentleman seems to be having a switch issue.

 

I have mine installed the same way. Your wires are in the right order but check where their harness plugs into the switch and make sure the wires are wired correctly. Black to black white to white. One of my harnesses were miswired from caliraised.

 

If that is correct then the relay may be miswired or inop

 

Called Caliraised and they're sending out a new harness! Likely a faulty relay.

 

So I'm in the middle of wiring my ditch lights. I'm confused on where that black box mounts. I saw where you had it in your video (attached below) so did you just mount it on one of the bolts near the fuse box?

 

Did you ever figure it out?

 

Probably, because it was over 6 years ago.