AZ BS Thread 4²0

I could use some too. Anywhere in Phoenix I can go to get some? Need for my ditch lights and awning.

 

I'm going to look around. Copper State bolt and nut has some stuff that's cheap enough. They also have the Allen head with pin sticking up in the center but they are pricey.
https://www.copperstate.com/shop/1129/35MSROCZ/products

 

I'll go check it out this week while I'm in Phoenix.

 

Just picked this up at Sprouts, going to be my new work lunch box. They had a black and a green one.

 

I couldn't be more proud of myself. I replaced the clutch and serviced the transmission and transfer case over the weekend. Hand tools and jack stand only.

 

Nice, I ran Crown King yesterday and got my fan to touch my fan shroud :|

Who's got experience with broken frame engine mounts?

 

I think Rigid makes their own security fasteners too, with a special bit and everything. I know their HQ is over in Mesa but I dunno if they have a showroom or any sort of retail setup where you could just walk in and ask for a handful of their security fasteners.

Is is just the bushing that's exploded? I've done motor mounts before and it's deceptively easy, you just gotta have a jack and a spotter to look for clearance issues.
If you tore something off the frame, that's over my pay grade.

 

Haha I was out there one day and saw a sign 47 miles til next services, So I just kept driving.
Then there was that hermit out there that seemed to make the trail much harder to get through. So weird

 

Well, I was half way to CK when I noticed the sound. Popped the hood and instantly noticed the location of the motor was tilting down up front. It did appear as that possibly BOTH motor mount bushings are torn as I didn't know about 05/06 Taco frame issues untill about 30 mins ago.. fingers crossed its old torn bushings.. I am at work and unable to provide full detail till later today when i can crawl under the truck

 

lol, I just kept trucking, the fan grinding down the shroud didn't sound great..

I Noticed the noise about 10 minutes before i reached the Hermit/Riverbed spot.

 

Yeah I had no clue it would turn into an actual trail

 

Damn.

 

and after feeling up my truck @ lunch, my drivers side mount has punched through the frame.

 

Monday's after a week off work really suck big donkey balls.

 

Careful what you say about sucking balls around here, someone may take you up on that offer.

 

Dislike button. Well on the bright side there's lots of talented fabricators here in the valley who should be able to get you squared away, and worst case a new fan blade isn't terribly expensive or difficult to replace.

Took my dash panel over to SDHQ to get cut for a switch pros! I still don't have one but hey whatever, hopefully I will soon!

 

Avoid 202 here in Tempe. Big accident. Dead stop traffic. Hope it's not a fatality

 

Man, you could go long travel with just a few nights of pee-pee touching.

 

Does anyone know of a good/trusted paint shop on the east side? I am finally getting my cab touched up where my shell fucked it up.

Also, anyone want a shell for a 6ft bed and an in bed camping set up? I will hook you up with a cheap deal haha