What have you done to your Tacoma today? 1st Gen Edition

wow,spray or roll kit?

 

Took it camping

 

should be part #
41400-34013

 

Now just pray for gunny

 

Just looking at the price one need not pray just bust out the Discover Card. That little nipple is going to be a little spendy

 

I know I cried a little inside when it broke

 

Locker installed and wired. Also a heafty amount of doughnuts in the snow. Twin stick came in today so next weekend it's going in.

 

Finally was able to snag 5 SCS Ray 10s in bronze and got 5 Goodyear Duratracs 265/75/16s to complete the set. Went to replace the factory spare that had been sitting up there since 2002 with one of the new tires and didn't like how it sat in the spare tire brackets. Took some measurements and took brackets off and positioned them on the new tire. Figured they needed to be about an 1 1/8" longer for a good fit. This was my first attempt at fabricating and welding, had a good teacher though. Finished by using some SEM rubber undercoating, hoping that would minimize marking up the new tire. Put everything back on today and tire now fits perfectly up there.

 

We've all been there. I felt that way last spring when it seemed like half the bolts in one front spindle broke off. It was less painful to throw it out and buy a new one

 

I can't even tell where you extended it.

 

I drove my buddies double cab with the big brake upgrade, I want/need it!

 

If you’re OCD at all you can. Looks good though.

 

bout to take mine for a spin again tonight.

 

I keep staring at it but I really can't see anything out of the ordinary. It looks like it was never modified that's crazy.

 

I know where it is but it's helllllllaaa clean looks like one piece!

 

If you move the wheel and not the tie rods theres a chance youll put more stress on the clock spring and break it. Its not a cheap part, alignment is the correct way to fix the wheel being off center.

 

I broke mine off too, solution was to just drill it out and sperglue in another with the same diameter I found at the parts store. $3 fix. It's just a vacuum line.

 

Need a new battery.
What have ya'll been liking?

 

There's a GB for these right now