MARYLAND TACOMAS

You haven't even chopped yours! Unless you're just a bitter individual.

 

You don’t know the Jackknife story.

 

Well, I'm waiting!

 

Long story short. Jack knifed a log splitter into the passenger side bedside. $500 in paintless dent repair later, you can’t even tell.

But i can still see the waves in it. So someday, i will high clearancce. But i’ll be bitter about every rotation of the cut off wheel.

 

Thanks for the explanation. I appreciate it.

 

Well, both sound like a reasonable price to me and I guess it comes done to can you do this yourself or not, which I am sure is not.

 

I could if I had enough patience and time, but for now I'll pay.

https://www.tacomaworld.com/threads/how-to-do-an-alignment-at-home.252256/

 

If patience were nickels I could retire.

 

I cant find the pictures... @EatSleepTacos

 

Dang, that sucks. Did it happen while backing up?

 

"Pictures or it didn't happen" is what I think some members say, of course I wouldn't say that.

 

yup. all i could see was the little orange handle poking up over my tailgate but when it broke over the edge of the driveway i couldnt see that it had turned until i heard metal warpage

 

did the same thing to the driver's side but with a 5x10 trailer about a year ago. only ruined a fender flare. But that happened after i slid about 150ft backwards down an ice covered hill and the trailer landing in the ditch stopped the truck from sliding any further.

 

I just threw up a little.

 

Shoved the dent in the bedside back out by hand. But the center clip on the back of that flare is broken too. Has a hanous gap when the sunlight makes the plastic expand

 

This all sounds like some shit I would do, and is why I consider myself Schleprock from the Flintstones.

 

Getting a Tbelt and w/pump and goods put on the t4r so hopefully helps with engine coolant circulation to lower my temps back to what they were even though they be in the acceptable range according to Toyota specs also heads passed leak down test so that was a relief .Now the hard part deciding what tires and size to get

 

@EatSleepTacos
I found them.

 

Man, I can't hang out with you guys! I just threw up again!