Thunder's Garage Tetris: 04 Taco + 12 CTS-V + 06 GSXR

Haha that's true. I was amazed to see how many fellow Tacos had retrofits. Glad to see everyone doing it right

 

Love mine! But I need to redo them, halos died and have mud in them for the past year

 

that's why I didn't do halos... just went with the stock look. My engine bay is already a bird's nest and I've really tried to clean it up recently. Still tons of wires everywhere

 

Yeah I'm not sure if I'll do halos on my next set or not, but it'll be better built and I'll take more than a day to do it haha.

Yeah I stopped adding lights until I get my fuse box set up

 

For sure. I really really like my Mini D2S's. They're fucking bright. And I have the old (3.0) version... they're up to 4.0 now. One thing though, I would recommend getting them nice and torqued down before sealing up the lenses, that way you can fix the inevitable off-rotation problem by putting them back on the truck, testing them, and perhaps maybe JBweld/steelstik-ing those suckers in place.

 

Yeah I would test them prior to putting the lense back on. Then once I get them all dialed in I'd seal it up and call it a day. But I've got other mods that come first

 

the endless list I am all too familiar with. haha

 

Nice! Those look slick. I love WO’s

 

always thought first gens were kind of meh...not really my look you klnow but yours..yours looks fantastic. how did you come across the spare tire carrier? make it or buy it?

 

Thanks! I liked the spare tire carrier too, reminds me of the older trucks that had the spare on a roll bar. That’s kinda the look I was going for.

Here is a link to the mount:
Fabtech FTT10002BK Angled Spare Tire Mount Kit (Angled Mount Only)

$201 Fabtech FTT10002BK Angled Spare Tire Mount Kit (Angled Mount Only)

https://www.amazon.com/dp/B000CMD3HI/ref=cm_sw_r_cp_api_9uThAbWRW2KM1

 

Damn nice looking truck

 

Replaced backup light switch, which was the source of all my aux reverse light woes, removed aux reverse light relay (cause who needs all that wiring along the frame?), replaced starter, replaced window (thanks thief), replaced radar detector (again thanks ), buttered up passenger door handle, fat matted passenger door. Now only thing left to fatMat is the driver door. Maybe I’ll get around to it when some other thief breaks that window

 

Added thread link for glass break sensor install and softer shocks in original post under helpful tips.

 

Subbed due to your front tag.

 

Thanks! I had it custom made. It turned out awesome.

 

New stickers to hopefully prevent another break in. If not, well the alarm will go off this time. The ones that came with the kit go on the inside of the window, which couldn't work because my tint is too dark.

Thanks @CBoy808 for the custom stickers.

 

Awesome! Roll Tide from a fellow Alumnus!

 

New setup!
Ram mount, short elbow, flat mount base, scosche flush mount, m6x60mm bolt, three nuts and a washer to do install.

I used two nuts butted up against each other (counter-tightened) to act as a "stop" for the bolt on the A-pillar, with a washer on the a-pillar side (get something that wont fall off the bolt, or use a washer with a slightly smaller ID and dremel it out slightly so that it will thread onto the bolt) and used the other nut to tighten the ball mount to the bolt, with a washer between the nut and the mount. This nut has to go on first, obviously. I basically just explained this in backwards order.




Elbow https://www.amazon.com/gp/product/B00IN4S4FS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Base https://www.amazon.com/gp/product/B004O8LF26/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Magnetic mount

$10 Scosche MAGFMB MagicMount Magnetic Car Phone Holder - Strong Magnet Mount for iPhone/Android - Secure Magnetic Cell Phone Mount for Flat Surfaces - Universal 360° Adjustable Mobile Cellphone Holder

https://www.amazon.com/gp/product/B00I608BFW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Ball mount

$32 RAM Mounts (RAM-B-367BU Motorcycle Handlebar Clamp Base (No Hardware)

https://www.amazon.com/RAM-RAM-B-36...F8&qid=1516425683&sr=8-2&keywords=ram-b-367bu

 

RTR! #ontothenextone