What Have You Done To Your 2nd Gen Tacoma Today?

Did an oil change using Mobile 1 5W30 Synthetic oil and Mobile 1 filter. Also I installed the Morimoto LED fogs, greased the UCA ball joints and emptied the oil catch can.

Also got my son a sweet 964 to play with at Rite Aid



Truck needs a GOOD wash and detail sooooo bad!

 

Excuse me sir, there is a cock in your shot.

 

i made an L bracket that connects to the corner bolt of the fuse box

 

Modified some 1" blocks into "shims"

 

Whats that oil catch can for? Never seen or heard of one

 

https://www.ebay.com/itm/ADD-W1-RED...Reservoir-Tank-Ver-1-/141295777222?rmvSB=true

 

Are they worth installing??

 

I don't have one but many say yes right @Lord Helmet

 

What are you all using for a keyless entry FOB? I need to replace mine (GQ43VT20T) but the ones on Amazon say 2015 Tacoma is dealer program. I would like the DIY programmable. Thanks

 

I gave mine away from my 15 and they used Youtube to program it right @AR15xAR10

 

Yes they are in my opinion. You should see the junk I clean out of mine at each oil change the catch can is about half full each time.

 

Quite the translation in the description lol

 

Can Confirm.

 

Ha ha, actually it's a hen, one of eight, and if only the Jack had "slipped" at that moment......I hate em. They shit EVERYWHERE. Wife wanted them to be "free range", so feathers and shit end up all over the yard and my garage. These will be the last we own until we have land

 

Is the brake lines what made you decide to go with the cst over maxtrac?

 

I had gunk in my catch can after 9K miles that would have gone back into the intake.

 

Not really because you get the brake lines with the maxtrac spindles. I run CST spindles on my silverado and was really impressed with their quality. I also wanted something stronger just in case I decide to build this truck any further.

 

please feel free to send me the top left and top center ones

 

I like spindle lifts because it keep geometry the same as stock and sadly I pulled the trigger on the 5100s and 885s before I considered them. Also I only knew of the 4" maxtrac spindles and only recently found out of these 3.5 spindles which is still pretty tall.
I'd like to make the switch to them next time but I'd be worried id need bigger tires than the 275/70/17 I have now.
You did the install yourself?

 

I did the install myself along with a few buddies to help empty the cooler. . I am only running a 265/70R17 and they fill up the wheel well just fine. i would have loved to gone with a bigger heavier tire but it gets driven 50+ miles a day so gotta say gas where I can.