What Have You Done To Your 3rd Gen Today?

I would buy that. If I wasn't already waiting on my Horns On Fire.

 

I bought one, finally... I couldn't take it anymore. I put 255/85/16 Cooper ST MAXX tires and a little lift.
Also doing the speaker swap - I already did the tweeters and it's a huge difference. So much happier.
Thanks TacomaWorld!!!!

 

Took the 2 youngest boys out to test the bikes after replacing Fork seals on both bikes




Mall flexing with No malls in sight

One didn't run very well got home went through the carb, lots of crap in it, cleaned it all out and it runs much better now but still have to tear back into the carb later, needs a new needle and seat

 

When driving down the highway with the window down, does this cut down on the wind draft?
I;d love to drive w. my window down.

I spy a tiny truck and another tonka truck. The kid in me is screaming to want them to play

. Oh my. This never gets old.

 

Wheels and tires today. MB TKOS IN 17x8.5, -6 offset...wrapped with 265/70-17 Falken Wildpeaks.

 

Heated seats needs to be my next mod. 13 doesn't include the wind chill.

 

how in the heck do you get that stuff on with no wrinkles ???? give me some tips please !!!

 

It’s got a rubber sorta stretchy consistency, so pressure with your thumb smoothed them out perfectly.

 

It also helped a lot to take the fog light out

 

did you heat the film up at all ?

 

No. Just lined it up and smoothed it out with my thumb.

 

It definitely helps, its more for when it rains, I can crack the windows and not have to run the AC and the temp is fine. It cuts down on the wind noise period which is a plus. The Gen 2 and Gen 3 windshield is abymssal in that regard though so theres not much you can do (even sound deadening entire cab doesnt help)

 

Just a simple led bed light mod today

 

You got a

 

...How did you get around the warnings about the seat airbag NOT being connected?......As I understand from speaking with service dept at Toyota Corp...if the airbag is not connected...

...it throws codes and can even keep the engine from starting?!...

 

Thanks for the review. I was looking forward to seeing what you thought. Price seems to have kept dropping (I started following once you mentioned you bought yours), great buy.

 

Me and my son have the XT 250's. Fun little bikes!

 

Get a buddy to help you and be safe!

 

He's probably got a ton of electrical mods planned for the near future.

 

I’ve been looking at the spidertrax spacers and really like them (new wheels are to expensive) but have a concern. On some reviews I have looked at, people said they had a rubbing issue in stock suspension. So with my stock suspension/ wheels on 265/70/16 discoverer at3’s, am I going to have a problem?