TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

Just waiting on his hardware to come in and that's what I'll be doing.

 

Haha everyone asks me this. Yes. Im doing it in about 20 min

 

Inquiring minds want to know... Did Scott get you up and running with the new tune?

Oh, hold up. I thought your appointment was earlier. Hope it all goes as planned for you.

 

Appointment is at 8 pacific. In 7 min. Im waiting in my garage with my computer ready to go

Edit: No emails or anything from scott.

 

Usually the way it works is I have Team Viewer open and I email him to let him know I'm ready and provide him with the code on the Team Viewer screen. He's always been on point at the agreed time. Even when I was running late once because I was helping my daughter study for a test and lost track of time.

 

Yes I do the same.

He did it, now truck wont start. I did reset the batter for 4min

 

Don't you have to have the new ecu coded, or something, with your vehicle? I forget the process.

 

Not that I was told.

 

@Torspd @loginfailed

Truck will start,go up to 1000 the chug and die. I will video it if you want

 

Did the truck ever start w/ the new ECU?



Try this procedure:

1. Disconnect battery
2. Swap new ECU into truck
3. Paperclip across pins 4 & 13 of 16-pin DLC3 (AKA: OBD2) connector
4. Reconnect battery
5. Hook up battery charger
6. Turn on ignition
7. Wait 30 minutes (use a timer, has to be at least 30 minutes)
8. Turn off ignition
9. Remove jumper from DLC3 connector
10. Try to start the truck

If it starts you’re done.

 

Sound like immobilizer need to be programmed.

 

Is scott capable of that

 

It’s done with the paper clip look at my post above for instructions

Just skip step 2 since you already have the new ECU in.

 

Here’s a drawing ..

 

Perfect

 

@GT7, so much drama for a Sunday morning. I’m going to step away.

Who the hell is this Scott guy?

 

@ThomasMore66 Nevr give up

He is the tuner for the ucon

And no batter charger haha

 

That’s what I’m talking about!

 

Scott is the person the sets up the UCON with the correct tunes for your rig. You hook the UCON to your laptop via USB and he does it remotely over Team Viewer app.

 

@loginfailed is a badass

Test drive time