What Have You Done To Your 2nd Gen Tacoma Today?

Looks like I’ll be ordering up new wheel bearings/ hub assembly’s very soon I’ve got some play in the wheel, was hearing a slight knock sound driving thru a parking lot last night going slow I could feel and hear a knock in the steering

 

Hangerzz

 

Do these hangers move the springs down lower than stock location?

 

I'm curious too..

 

@b_r_o
The hanger is about 1" lower than stock to fit longer shackles. The height is about 3/8" lower than stock size 245/75-16 spare hangs. As for the spring eye height, it depends on how long shackle you choose. Note the ramp on leading edge to glide over rocks
https://archivegarage.com/products/tacoma-hammer-hangers

 

Long list from yesterday, can’t believe @559 MOTORSPORTS was able to knock all of this out in one day. Alignment tab gussets, Spindle gussets, CMC, Steering rack swap w/ poly bushings, and got my coilovers cranked up a bit.

 

Makes it nice to get it all done at one time

 

Alignments are pricey. Do it all in one go and only pay for one! Truck is going back next month when my King Smoothies aren’t on backorder anymore..

 

Stock intake cap off.....Enginaire on.

 

Got her stuck

 

Looks goog man! Did you need the wheel spacers for the 285s or just want a little wider stance? I like how they did the CMC. It looks like it gives a lot more clearance than just the plate.

 

Baby got new shoes. Falken Wildpeak 265/75-16

 

That lower silver bumper cover thing. What is it?

 

@KBvoodoo high rise crossbar installed, and applied 3rd gen camouflage

 

Comes with the xspx package, just a plastic cover to make it look more like trail edition 4runners and stuff I’d imagine.

 

About to place an order for a new Brute Force front bumper and probably some 4x innovations sliders. Then in December I'll be "home" for a month back in Tacoma. I'll be working during the week but here's the catch. The weekends I'm going to be putting together a DIY roof top tent.

 

Gotcha, that explains the skid plate too. Thanks

 

Finally got around to making a proper bed mount for my maxtrax. Was about a 1/2 beer project. Glad to have them secured and rattle free. A place for everything, everything in its place...

 

Added some grease to my LR UCAs and noticed some grease. I either have a cut in my boot or I used too much grease so I guess time will tell. Gotta keep an eye on it. Anyone else have this issue? Boots aren’t that old.

 

Super jelly right now. You going hybrid or full plate up front?