What have you done to your Tacoma today? 1st Gen Edition

I thought i had the template somewhere. I think you can buy the material at your local home depot or lowes.

This post was no help..lol

 

check the for sale section. someone's making pre-cuts.

 

I'll buy the materials and wait for you to find templates.

 

Not sure if this will work but I got this a while ago from someone on here. PDF files.
@Whitebutler @Fernando

 

Are those sized so I can transfer to a comparable printer and blast away?

 

Can get pond liner from home Depot or Lowe's.

 

Had to do starter contacts this weekend as the starter got stuck engaged. When this happens you have to disconnect battery asap as you risk wiring harness catching fire. Thank goodness I had a 10mm wrench sitting on the floorboard. I picked up the two contacts and new plunger for 15 even from local electric auto parts place.
Also, I had a loud clink type noise at highway speeds or steady rpm over 2400 and only in warm weather (70+). Racked my brain for months thinking and tinkering. I was convinced it was in the EVAP somewhere. I noticed a loud pop or clink noise behind my head one time. It dawned on me that it could be the damn non OEM, brittle/split o-ringed gas cap. Swapped an OEM one over from a Cruiser and sure enough, never heard that noise again. Crazy.

 

should print out on like 6 or 7 sheets of paper just match up and go to town from what I was told

 

I'm gonna try it

 

Here we go. Lol. This what i was getting at earlier

 

Sunday morning Haze. I had it too but mine was at 1:45 this morning.

 

Thick rubber, but @cnote4l can verify the materials used.

 

cab is done. gotta do the pan tomorrow.

shoulda mentioned im using the daystar poly mounts with 1" lift built in.

 

Did a fabtech coilover lift and new fuel revolvers 15x10. And new headlights.

 

Repurposed some damaged door bug screen. My dog did not appreciate the bug screens and ripped them off after 1 week. I hate wasting material so I re used the peel and stick velcro and trimmed the screen to fit my flip up windows. Looks sorta clean and really functional. These Texas mosquitos suck! No pun intended

 

can we get some details on your platform setup?

 

Each set is designed and precut to 1st gen specs to provide max engine coverage and account for heat ventilation. Made from our commercial grade marine rated rubber with oil/chemical resistant properties.

 

Looks great...where did you get the headlights?

 

good idea!

 

Laid out the haul from Friday.


Pulled apart the rear diff to prepare for True Tracs.


Followed by stripping the front diff which will also get a True Trac.


Not bad for an afternoons work while listening to the Saints game.