What have you done to your Tacoma today? 1st Gen Edition

My truck is a 06 Tundra shoe horned into a 03 Tacoma. It is possible to do this to a regular Tacoma though. It would be like running new light wiring power to the 3rd brake light out side bulbs then connecting to a switch.

 

What side do you elevate off the ground to make the noise stop. I would focus on that side. Also put up some more detailes.

 

Nice looking Rig for sure, time to update the spare!

 

I figured it out, turned out that my skids got shifted wheeling and the alignment for the middle bolt was so tight that it causing the skid to make a terrible clunk noise when there was movement

 

I haven't figured it out yet. First time I got it was on the way to Reno picking up 4x4 parts. My auto tech professor told me to spray carb spray on the vacuum fittings while the engine is idling and if you hear the engine rev there's a leak.

Could be the o2 sensors, maybe. I checked the Toyota service history and the truck had the same code in 2010. The tech solved it by cleaning the MAF housing. I tried doing the same but it's clean, no carbon buildup or anything.

The 4 cyl does 0-60 in 4.5 years, but recently it's been feeling more like 45.5 years.

Honestly just going to bring it to the dealer at this point. I can't figure it out.

 

Fuel filter is original I think. I'll try changing it.

I have a K&N hot air intake on there so it could be that too.

 

I dont know the codes very well but my upper o2 sensor went bad and had the exact symptoms. Ironically it was while working in Reno.

 

Great news and a simple fix! Nice job on proscess of elimination.

 

Reno has never caused anything good to happen to anyone haha

 

It's funny while they were pulling (the wrong) front diff off of the 4Runner I was making small talk with the workers in the office. I said "what a beautiful city you have" and the cashier stopped what he was doing, looked me in the eye and said 'What beautiful city?" and started laughing.

 

Holy shit that's a beautiful picture. The knocked over Pepsi can really makes it.

 

I want to know more about the rack. That's exactly what I want to do.

 

Yeah, got a 04 DC in black. Switching everything over then selling.

 

I would assume your maf sensor is bad. Mine was "fixed" by cleaning it however came back on like a year or two later

 

New clutch, master and slave, new brake lines to the proportioning valve, tcase mods and twin stick all done this weekend. Time for new bearings in the carrier and a solo LT kit. Sewing skills are extremely rusty but I'll eventually need to get the leather boot fixed up and console trimmed.

 

Good morning @JKO1998 how big are your lab puppies

 

All sold but 1. Im a failure be cause I don’t have any more up to date pictures, but I’ll work on that.

 

Add me also as interested! Thanks

 

Anyone know what website has Extended travel kings in stock ?? Need them asap

 

Asked my pops to weld additional steel on top of my 3/16 skids since they keep bending from the rocks. He said he could weld 1/4 on top. Too much huh?? Maybe another 3/16?