What Have You Done To Your 2nd Gen Tacoma Today?

Same here. I thought the cable was going to come out of the lower valence but it doesn’t. It comes out of the bottom part of the bumper just below the radiator opening. I’ll post some pics and tag you in them when it’s complete.

 

Added a NASA worm sticker my buddy cut for me.

 

Got that viaair 88p for my birthday back in September. Used it a dozen or so times and love it. Works flawlessly

 

Saw this and went over to that thread. What about these tweeters you have. Do thy mount right in or are they tricky. I know the 3rd gen have a direct replacement but didn't see much on our 2nd gen.

 

The 2nd gen is not a direct bolt in tweeter like the 3rd gen. But, ********* makes mounting plates for replacing the tweeter in the 2nd gen. You will need to find the cutout diameter for the tweeter to order the correct mounting plate from *********.

********* Tweeter Adapter

********* asks for a tweeter diameter as a decimal. So, for the Infinity Reference REF-275tx, the details say this is 1 5/8" which equals 1.625" for the ********* adapter. ********* also provided a wiring harness for the tweeter. For the 2nd gens, the lower door speaker is powered through the tweeter. The wiring harness allows you to continue the signal to the lower door speaker and attach the tweeter without splicing into the wiring.

They have lots of great videos on the installation process to.

 

oh good. thanks sir. If i do it (which would be soon) i would get the same ones as you.. I liked them all matching like in your picture. So i get the speakers from that thread and then the tweeter we need(same brand). Plus, adapters and wire kit from TT and i'll be good to go. Nice and thanks again

 

I also ordered

Noico 80 mil (2 mm) 36 sqft (3.4 sqm) car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening

Noico 80mil sound dampening. Figured I may as well do that as well while I have the doors pulled apart (don't forget a roller to apply the stuff).

 

...and a blow dryer / heat gun!

I however and holding off on the sound deadening for now. I want to be able to compare the Infinity setup with and without it, so I'll be doing it later.

 

New wheels shipped this morning

Time to start checking for tracking updates every couple hours

 

What wheels did you order? Mine should be arriving by Thursday (Level 8 Tracker Pros 16x8.5).

 

Same ones I have now, just sized up... Pro Comp La Paz series 29 Black w/machined lip in a 17x8.5. Got a pretty decent deal on them thru 4 Wheel Parts over the weekend, $131/ea with free shipping

 

That's an awesome deal!

 

I know... Wasn’t originally planning on upgrading sizes until at least spring but some deals are just too good to pass up

Now if only I knew of a good deal on new Ridge Grapplers in a 285/70r17...

 

I’ve got the same divider and heated/bent one side to make room for holster and

 

Aaaaaaaaannnnd now I'm going to do that.

What did you use to heat the plastic? Any tips you have or is straight forward?

 

Measure twice..sandwiched between two pieces of wood in a vise and heated with heat gun and bent to form. pretty easy.

 

Working towards a little something

 

Those are sexy

 

Thanks!!!

 

When are they going on?