ECT Auto Turn ON Module

OP says no fuse needed but i put in line 3 amp just because. the old glass tube kind, had it laying around.

 

Is it possible to pull the ECT Button from the front without removing any of the dash trim ?

 

It's so easy to pull the dash trim and push it out. You may scratch up the dash trying to pry it out.

 

it takes 30 seconds to pull the trim. first around the head unit then the piece that is on the side of the gauges then the final lower trim. all done wit no tools. do not be shy, yank on them they pop off.

 

Anyone else really annoyed Toyota used the same size button but cut the trim so the buttons only fit in the same spot? I tried to rearrange my buttons and was denied.

 

@mesojdm any idea when you will have more of these? Would love to pick one up!

 

Nothing a small file can't fix. Just need to file the left side inside the opening.

Haven't really got around to making more of these..really busy. I have all the components...just need to set aside some time and get crankin. Sorry that doesn't help ETA lol.

 

@mesojdm What does it take to assemble. I'm handy with electrical and wiring

 

the OP had version 1.0 it works fine and easy to get parts from Amazon and wire. maybe he will post you the link to that thread it, i can't find it.

 

Me-So have you ever thought of selling this as a kit so people can solder and assemble this themselves? I wouldn't mind assembling this from loose parts myself. Just a thought.

 

I've thought about it.. maybe I'll offer a kit. But most people just want a PNP solution and that's what I was trying to provide.
To assemble you need JST crimpers which isn't a common tool. And program the arduino with the code. I'll consider it though

 

@kahanabob Here's the instructions for the original version of this mod. This works great. I upgraded to version 2 because I don't want to have to get behind the dash to disable the mod every time I took my truck in for service. To me, the ability to disable the mod with a button push was well worth it.

https://www.tacomaworld.com/threads/ect-mod-on-all-the-time.456373/

 

I still want the pnp!

 

yea same here, i actually made up the original version, still have it, but waited until others proofed it then version 2.0 came out and i bought and installed. wondering if the dealer would even notice it?

 

I’m still on version 0.0



Using my finger to push the button

I’m ready for the PNP!

 

Anyone find an ignition on 12 volt source to tap easily instead of the power outlet circuit? Need this so the module doesn't deactivate when truck is in accessory mode.

 

OP said the cig lighter source would solve that problem.

 

Cig lighter is acc not ignition on source and would not lfix the problem.

 

What about whatever powers the gauges? I think they only go on with the ignition, but not sure about the voltage.

 

Yea, just have to find that wire or fuse.